08-24-2018, 03:01 PM | #1 |
DEVLMAN
Drives: White 2018 ZL1 Join Date: Dec 2017
Location: Chandler, AZ
Posts: 66
|
Harness Bar
Anyone utilizing a harness bar in their ZL1? I don't want to get a full roll bar/cage, I would just like to install a 4/5 point harness. I found one on JPD Motorsports page, but it says it is for the V6/SS Model. I'd imagine that it will still fit in the ZL1.
Any input would be appreciated. |
08-24-2018, 04:01 PM | #2 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,915
|
brey krause makes one and so does studio rsr and i think braum but i wouldnt trust them lol
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
08-24-2018, 05:11 PM | #3 |
Drives: ZL1 A10 Join Date: Dec 2017
Location: Wisconsin
Posts: 306
|
Brey Krause makes one that is bolt in to existing points and no damage to any seating. Combine with Schroth ASM 4 pt works well for me.
__________________
My rides:
2017 Camaro ZL1 A10 2015 Jeep Grand Cherokee Diesel 2012 Audi S4 1992 Porsche America Roadster 1990 BMW 325Ic |
11-07-2018, 06:13 AM | #4 | |
Drives: 2018 ZL1/1LE Join Date: Jul 2018
Location: SOUTH CAROLINA
Posts: 50
|
Quote:
On the seat belt mounting points? Had a Brey-Krause in my 5TH Gen, worked well. Just undecided on which one to use. Any one else in here using the 6th gen version
__________________
|
|
11-07-2018, 04:19 PM | #5 |
Drives: 2015 Z/28 Join Date: Jun 2011
Location: Rhode Island
Posts: 245
|
Mounting points are the rear mounting bolt on your front seats and the seatbelt mount bolts at the lower outside corner of the rear seats. Reasonably easy if all the hardware is included with the harness bar.
|
11-07-2018, 06:23 PM | #6 | |
Drives: 2018 ZL1/1LE Join Date: Jul 2018
Location: SOUTH CAROLINA
Posts: 50
|
Quote:
Like the bar Studio RSR offers. Bigger tube and better design.
__________________
|
|
11-07-2018, 08:45 PM | #7 |
Drives: 2015 Z/28 Join Date: Jun 2011
Location: Rhode Island
Posts: 245
|
If the RSR doesn't offer height adjustability you may want to skip it in favor of the brey krause. You want to make sure your shoulder harnesses are mounted at the proper height (angle) in reference to your shoulder height. The brey krause offers that adjustability.
|
11-19-2018, 10:26 AM | #8 |
DEVLMAN
Drives: White 2018 ZL1 Join Date: Dec 2017
Location: Chandler, AZ
Posts: 66
|
Thread resurrection:
For those who have harness bars, how are you defeating the seat-belt warnings? Is there some way to turn it off without just simply plugging the seat belt in? |
11-19-2018, 12:12 PM | #9 |
Drives: ZL1-1LE Join Date: Feb 2018
Location: OH
Posts: 53
|
Another option is the Schroth Quick fit pro. I run this in my car. You just have to order the BMW E90 Buckle Version. It will plug into your existing seat belt receptacle, this way full function of airbags. Also will work with a hans.
https://www.hmsmotorsport.com/products/quickfit-pro |
11-19-2018, 12:19 PM | #10 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,915
|
no way to get around seatbelt lights as far as i know...the vette guy have an option but not us
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
11-19-2018, 12:20 PM | #11 | |
Camaro pilot
Drives: 69 Camaro, 2014 ZL1 Join Date: Dec 2015
Location: Medford OR
Posts: 299
|
Quote:
__________________
2014 ZL1 Camaro
1969 Camaro |
|
11-20-2018, 09:09 AM | #12 |
Drives: ZL1 A10 Join Date: Dec 2017
Location: Wisconsin
Posts: 306
|
Avoiding the seat belt light is easy. Go to your Chevy dealer and have them order you seat belt extenders. Plug it into the seat belt "receiver" on the inboard side, no seat belt warning light.
Best part the seat belt extenders are free from GM. Thank you severely overweight people!
__________________
My rides:
2017 Camaro ZL1 A10 2015 Jeep Grand Cherokee Diesel 2012 Audi S4 1992 Porsche America Roadster 1990 BMW 325Ic Last edited by Badgerbimmer; 11-28-2018 at 04:36 PM. |
02-08-2019, 02:52 AM | #13 |
Drives: Track prepped 2018 Camaro ZL1 (a10) Join Date: Aug 2013
Location: Victoria B.C. Canada
Posts: 1,389
|
Any advantage to the more expensive Studio RSR ($950) over the cheaper Brey Krause ($650) besides looks?
__________________
2018 ZL1; Mag 2650 and 2 inch LT Headers , every SPL suspension upgrade, MCS 2 way coilovers, sway bars, square SC3R 325's all the way around, and multiple brake cooling upgrades
|
02-08-2019, 12:01 PM | #14 | |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,915
|
Quote:
nope not that i know of id probably go studio rsr since they are closer and could do a custom powdercoat to match my car and install it also!
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
|
|
|
Post Reply
|
|
|