11-03-2018, 05:05 PM | #1 |
Drives: 2018 Camaro 1SS Join Date: Jun 2018
Location: DFW
Posts: 422
|
Mighty Mouse Catch can install question
Hello,
Do anyone know which side is clean and dirty side of can? Thanks
__________________
2018 1SS 6MT: SOLD
Last edited by Chef-j; 11-03-2018 at 05:27 PM. |
11-03-2018, 07:31 PM | #2 |
Drives: 2017 ZL1 6MT Join Date: Feb 2018
Location: Memphis, TN
Posts: 190
|
Looking at the diagram. I would say the unfiltered side is the inlet your finger is pointing at. The filtered side has the outlet port with the sight glass underneath it.
__________________
2017 ZL1 Arctic Blue Metallic / 6MT / sunroof / NAV / PDR / RotoFab CAI + dry filter / Tony Mamo TB V1 / Skip Shift Eliminator / Hurst Short Throw Shifter / ZL1 floor mats / Dead Pedal cover (to match other pedals) / ARH Catless 1-7/8" headers + ARH X-pipe + AWE Touring Axle-Back / Diode Dynamic smoked side markers / American Authority tow hook
Last edited by Agent K; 11-03-2018 at 07:56 PM. |
11-03-2018, 10:38 PM | #3 |
Drives: 2018 SS 1LE Join Date: May 2018
Location: Arizona
Posts: 292
|
Clean, filtered side is the one with the little gold element inside.
Pop the filter off and look down inside
__________________
🌽 Sauced, 2018 SS 1LE - 123mph @ 5,000 DA
ARH 2”x3” FULL System, Pray Ported MSD Intake Manifold, Pray Ported GM 95mm TB, RotoFab CAI, DsX e85 Kit, MightyMouse Catch Can, NicD Tune https://instagram.com/corn_sauced?ut...d=o0ako89uurwl |
11-04-2018, 12:02 AM | #4 |
Drives: 2018 Camaro 1SS Join Date: Jun 2018
Location: DFW
Posts: 422
|
Awesome. Thanks!
__________________
2018 1SS 6MT: SOLD
|
11-07-2018, 06:25 AM | #5 |
Drives: Camaro Join Date: Sep 2018
Location: USA
Posts: 520
|
Can someone explain to me why you need a catch can on a low h.p. engine & how can any oil get in there without a vacuum pump.
|
11-07-2018, 09:53 AM | #6 | |
Drives: 2018 Camaro SS 1LE Join Date: Oct 2018
Location: Treasure Coast, FL
Posts: 384
|
Quote:
Your intake is pulling in air from the pcv crankcase and oil vapors are going straight into the intake and coating the back of valves that will never be washed off due to direct injection. You may want one for piece of mind or pass and someday down the road might possibly need to have the valves extensively cleaned. Could be at 40k miles or 140k miles. So its really up to you. |
|
11-07-2018, 10:29 AM | #7 | |
Drives: Camaro Join Date: Sep 2018
Location: USA
Posts: 520
|
Quote:
|
|
11-07-2018, 12:09 PM | #8 |
Drives: 2018 Camaro SS 1LE Join Date: Oct 2018
Location: Treasure Coast, FL
Posts: 384
|
|
11-08-2018, 01:36 AM | #9 |
Drives: 2016 Camaro SS Join Date: Mar 2017
Location: Dubai
Posts: 43
|
Reading this thread, so decided to go check my catch can and empty it. This is the contents after approximately 3,000 miles
|
11-08-2018, 06:16 AM | #10 |
Drives: 2018 SS 1LE Join Date: May 2018
Location: Arizona
Posts: 292
|
And even after seeing these pics some people will still tell ya catch cans are 100% worthless, lmao
__________________
🌽 Sauced, 2018 SS 1LE - 123mph @ 5,000 DA
ARH 2”x3” FULL System, Pray Ported MSD Intake Manifold, Pray Ported GM 95mm TB, RotoFab CAI, DsX e85 Kit, MightyMouse Catch Can, NicD Tune https://instagram.com/corn_sauced?ut...d=o0ako89uurwl |
11-08-2018, 10:12 AM | #11 |
Drives: 2018 Camaro 1SS Join Date: Jun 2018
Location: DFW
Posts: 422
|
Catch can is now installed. When i pulled PCV return hose there was some oil in line. Im glad i picked up a catch can.
__________________
2018 1SS 6MT: SOLD
|
11-08-2018, 11:56 AM | #12 |
Drives: 2018 Camaro SS 1LE Join Date: Oct 2018
Location: Treasure Coast, FL
Posts: 384
|
|
11-09-2018, 12:00 AM | #13 |
Drives: 2016 Camaro SS Join Date: Mar 2017
Location: Dubai
Posts: 43
|
I fitted mine when the car had done less than 1k miles, however I check it and empty it every 5,000km
|
|
|
Post Reply
|
|
|