|
|
#15 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 7,561
|
Nice...I am out South West over by Homestead.
__________________
2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel |
|
|
|
|
|
#16 |
![]() Drives: 2018 1LE SS "Silver Bullet" Join Date: Jun 2016
Location: Charlotte
Posts: 619
|
__________________
Silver Bullet 1LE SS
|
|
|
|
|
|
#17 |
![]() Drives: 2017 2SS Fifty Join Date: Nov 2016
Location: Texas
Posts: 12
|
Did you ever solve this?
|
|
|
|
|
|
#18 |
![]() Drives: 2016 Chevy Camaro 2SS Join Date: Aug 2012
Location: Atlanta, GA
Posts: 289
|
Check the plug once more. I had a similar issue and i had to make sure they were all aligned with the other pins. I will compare your tune to my mines if you haven't already found the solution.
|
|
|
|
|
|
#19 |
![]() Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,415
|
When every they default to 40% there is a communication issue between the sensor and the computer.
Ted. |
|
|
|
|
|
#20 |
![]() Drives: 2016 2ss Join Date: Aug 2015
Location: Phoeinx, AZ
Posts: 139
|
No i never solved this. I've re-seated the pin a million times. I have a pump near me with 100 octane unleaded and im just gona tune off of that.
|
|
|
|
|
|
#21 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 7,561
|
Have you checked the wiring harness to make sure there is continuity and not a bad connection?
__________________
2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel |
|
|
|
|
|
#22 |
![]() Drives: 2016 2ss Join Date: Aug 2015
Location: Phoeinx, AZ
Posts: 139
|
|
|
|
|
|
|
#23 |
![]() Drives: C5 Z06 LS7 Join Date: Jun 2014
Location: San Juan PR
Posts: 15
|
We can take a look at it for you @ decatur.
|
|
|
|
|
|
#24 |
|
Iroc-z
Drives: Camaro SS 2017 Join Date: Mar 2019
Location: Mexico
Posts: 2
|
finally you resolved the problem? I have the same problem in my 2017, the signal is bad or no signal in the ecm, I checked everything and everything is good, the problem persist not have a signal in the ecm
|
|
|
|
|
|
#25 |
![]() Drives: 2016 2ss Join Date: Aug 2015
Location: Phoeinx, AZ
Posts: 139
|
No, I never figured it out
|
|
|
|
|
|
#26 |
![]() Drives: Corvette Join Date: May 2016
Location: New Albany
Posts: 45
|
I had the same problem and it was a bad sensor.
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|