[NickyRacerBoy]

Front tires wore hence alot of steering input .

best time 1.30.8

[jebfour]

Nice vid as always.

What setup are you using so that you can use the harness with the stock seat?

[NickyRacerBoy]

Originally Posted by jebfour

Nice vid as always.

What setup are you using so that you can use the harness with the stock seat?

Thanks Jeb.
So I use to run stock seat with 4 point and Brey Krause harness bar but I got tossed around WAY to much! Now I have Recaro seat found below with 6 point harness also found below. The Planted seat bracket makes it all a snap to bolt right up to stock locations!



070.86.UU11
(Recaro)
Recaro Profi XL Seat - Velour Black Bolster, Velour Black Insert,
White Logo, 3/4/5/6 Point Belt
$1,099.00 0.00% $1,099.00 $1,099.00
1 PAOSSM-G
(Planted)
Planted Aluminum Offset Universal Side Mount- Grey $109.95 0.00% $109.95 $109.95
1 SMHK (Planted) Planted Side Mount Hardware Kit $6.00 0.00% $6.00 $6.00
1 0.70.9NT (Recaro) Recaro Seat Slider (inside bar, without tabs) $135.00 0.00% $135.00 $135.00
1 SB284DR
(Planted)
Planted Seat Bracket- Chevrolet Camaro [6th Generation] (2016+) -
Driver
$140.00 0.00% $140.00 $140.00
1 SHK (Planted) Planted Seat Hardware Kit $12.00

[jebfour]

Thanks for your reply! I’ll check all of this out.

[Move_Over]

Nicky - I see you're using the suction cup mount for the Aim, i bought one of these to test out, and it works very well. Keeps the already small vision clear.

https://www.proclipusa.com/product/p...ter-dash-mount

I'll get a pic of my setup.

[Move_Over]

Also, did you add a socket for your 12V, if so where?

[NickyRacerBoy]

Originally Posted by Move_Over

Also, did you add a socket for your 12V, if so where?

So I bought the AIM DL Color version. There is a cable that runs from the OBD II port to the AIM unit. The OBD II port has 12v so the unit is always fully charged. I can run without the cable as the unit has rechargeable batteries. The advantage of the cable is I data log PIDs off the stock ECU. I can then watch and graph brake pressure and others thru out the track session. The AIM comes with a bracket that attaches to the magnets found in the main unit. I would need to attach that bracket to that cool setup that you have. Is your mounting surface steel for the magnets to attach to?

THANKS!

[Move_Over]

Originally Posted by NickyRacerBoy

So I bought the AIM DL Color version. There is a cable that runs from the OBD II port to the AIM unit. The OBD II port has 12v so the unit is always fully charged. I can run without the cable as the unit has rechargeable batteries. The advantage of the cable is I data log PIDs off the stock ECU. I can then watch and graph brake pressure and others thru out the track session. The AIM comes with a bracket that attaches to the magnets found in the main unit. I would need to attach that bracket to that cool setup that you have. Is your mounting surface steel for the magnets to attach to?

THANKS!

I just drilled the bracket right to my mount. It’s wide enough. Then mount your aim to the magnetic bracket.

[NickyRacerBoy]

Originally Posted by Move_Over

I just drilled the bracket right to my mount. It’s wide enough. Then mount your aim to the magnetic bracket.

Excellent! Ordered.

[GunMetalGrey]

Originally Posted by NickyRacerBoy

Thanks Jeb.
So I use to run stock seat with 4 point and Brey Krause harness bar but I got tossed around WAY to much! Now I have Recaro seat found below with 6 point harness also found below. The Planted seat bracket makes it all a snap to bolt right up to stock locations!

Any idea how much the Brey Krause harness bar weighs?

Sorry can't google it, long story...

[JeromeS13]

Originally Posted by GunMetalGrey

Any idea how much the Brey Krause harness bar weighs?

Sorry can't google it, long story...

According to their website, 16 lbs.

I replied in the other thread, too...

[GunMetalGrey]

Originally Posted by JeromeS13

According to their website, 16 lbs.

I replied in the other thread, too...

16lbs is light! Thanks for such a quick reply, I appreciate you looking that up for me

[seanblurr]

Would that clip mount work on the other side of the gauge cluster?

[Airfuel]

Thunderbolt is a great track....did many laps there but on a motorcycle.

Love watching the track from another view.

Those are great times!