|
|
#1 |
![]() Drives: 2016 Camaro 1SS Join Date: Feb 2018
Location: S.Florida
Posts: 75
|
Fans on heat exchanger
Anyone install fans on there stock heat exchanger? I doing the LT4 conversion and plan on installing a pair of 8” spal fans...
Ray |
|
|
|
|
|
#2 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 20 X3M CP & 19 ZL1 1LE A10 Join Date: Jun 2013
Location: Brenham, TX
Posts: 3,517
|
I don’t know if these are needed like back in 03/04 with the Cobra. This car flows air pretty well on the 1000 coolers it has.
__________________
🔺22 RS E TRON GT
🔺21 Model S Plaid |
|
|
|
|
|
#3 |
![]() ![]() Drives: 2019 ZL1 1LE A10 Join Date: Jan 2015
Location: The ATX
Posts: 966
|
For drag racing? Maybe. Not need for real track use.
__________________
Ryker #29
2019 ZL1 1LE A10 2015 Z/28 #809 |
|
|
|
|
|
#4 |
![]() Drives: 2016 Camaro 1SS Join Date: Feb 2018
Location: S.Florida
Posts: 75
|
Drag racing, car will never see a road course.
Ray |
|
|
|
|
|
#5 |
![]() ![]() Drives: Red hot ZL1 A10 2017 Join Date: Nov 2016
Location: MS Back to France (29)
Posts: 804
|
If you want to put a fan,
I think the best will be on the horizontal radiator for the trans... It will generate a flow and prevent trans overheat issue went racing behind another car ;-) |
|
|
|
|
|
#6 |
![]() ![]() Drives: 2019 ZL1 1LE A10 Join Date: Jan 2015
Location: The ATX
Posts: 966
|
I'd think about a Alchol/Water sprayer for the coolers if it was just for Drag Racing. In all honestly, thought about designing something for Road Racing but never can get to it.
__________________
Ryker #29
2019 ZL1 1LE A10 2015 Z/28 #809 |
|
|
|
|
|
#7 |
![]() ![]() Drives: 69 GTO, 05 GTO, 2018 Silver ZL1 Join Date: Jan 2012
Location: Springfield, OH
Posts: 847
|
You can also take a Look at the Weapon-x boost chiller!
|
|
|
|
|
|
#8 |
![]() Drives: 05 GTO / JETTA TDI Join Date: Jan 2012
Location: St Pete Fl
Posts: 630
|
If you are doing a conversion, skip the HX and go direct to Active Interchiller
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|