Chevy Brand Aftermarket Exhaust

MPLJR1222 · 08-21-2018, 06:40 PM

I bought my 2018 1SS a few weeks ago, and I am now looking to upgrade the stock exhaust. As I do not want to void my Chevy warranty, and the extended warranty i also purchased, I've been looking into the Chevy brand aftermarket exhaust which when installed will not void any warranty. Does anyone have any experience purchasing this exhaust? I cannot find much info other than the website link below, just looking for thoughts on sound / looks / value.

https://accessories.chevrolet.com/pr...tegoryId=98022

Wierd Harold · 08-21-2018, 07:41 PM

From other posts I've seen these are made from gm by Borla

FoCoCamaro · 08-21-2018, 10:12 PM

Adding any axleback exhuast will not void your warranty. You have a few more options that way too...

srcstc · 08-22-2018, 05:26 AM

I don't think there's anything they can deny you warranty coverage for because of an axle back.

Sent from my iPhone using Tapatalk

*mlee* · 08-22-2018, 05:51 AM

https://www.camaro6.com/forums/showthread.php?t=524566

You should be fine with any axle back as far as warranty but technically GM parts will keep you safe for sure (or at least most of them)

FrostySS · 08-23-2018, 09:21 AM

No axle back exhaust will void your warranty.

dfwcowboy · 08-23-2018, 10:14 AM

I have those on my LT. I'm not sure what the differences are if any between the V6 and the V8, but they look identical on the outside. I'm quite happy with them. The sound isn't much at low RPM, but starts to sound quite nice at higher revs. The volume isn't that much louder than stock so if you're looking for loud you're better off with something else.

TJay74 · 08-24-2018, 08:53 PM

There is not one axleback out there that will void any of the OEM or extended warranty. AS long as the system installs after the secondary cats you are fine.

FL2018-1SS · 08-27-2018, 08:38 PM

I just got my axle back Borla Type S for my 2018 1SS (non NPP). Cost $799 + install. My first mod and I tell ya I absolutely friggin love it. The sound matches the looks and the performance now. The GM parts IMHO seem overpriced at $1195.

dfwcowboy · 08-27-2018, 08:51 PM

Quote:

Originally Posted by FL2018-1SS

I just got my axle back Borla Type S for my 2018 1SS (non NPP). Cost $799 + install. My first mod and I tell ya I absolutely friggin love it. The sound matches the looks and the performance now. The GM parts IMHO seem overpriced at $1195.

The GM part is $851.44 after the NEW2018 Promo code at ShopChevyParts.

Even though the GM part is made by Borla, some have said it's special made for GM and has a different sound than their non-OEM versions. I don't know if it's true. At any rate if you pay full retail, the OEM version is considerably more expensive. If you shop around the difference isn't much. The bow tie on the tip has to be worth something.

08-21-2018, 06:40 PM	#1
MPLJR1222 Drives: 2018 Camaro 1SS Join Date: Jul 2018 Location: Connecticut Posts: 60 View My Garage	Chevy Brand Aftermarket Exhaust I bought my 2018 1SS a few weeks ago, and I am now looking to upgrade the stock exhaust. As I do not want to void my Chevy warranty, and the extended warranty i also purchased, I've been looking into the Chevy brand aftermarket exhaust which when installed will not void any warranty. Does anyone have any experience purchasing this exhaust? I cannot find much info other than the website link below, just looking for thoughts on sound / looks / value. https://accessories.chevrolet.com/pr...tegoryId=98022

08-22-2018, 05:51 AM	#5
mlee CamaroFans.com Drives: ZLE & ZR2 Join Date: Oct 2008 Location: Conroe, TX Posts: 38,040 View My Garage	https://www.camaro6.com/forums/showthread.php?t=524566 You should be fine with any axle back as far as warranty but technically GM parts will keep you safe for sure (or at least most of them) __________________

08-23-2018, 09:21 AM	#6
FrostySS Drives: 2018 Redline Edition 2SS Join Date: Dec 2014 Location: Mays Landing, NJ Posts: 778	No axle back exhaust will void your warranty. __________________ 2018 Redline Edition 2SS- A8, NPP, MRC, Recaro seats, ECS Novi 1500 tuned by EFX, cat deletes, Mighty Mouse Wild CC, GM STB, smoked ZL1 3rd brake light, Xpel XR Black 35% tint all around, Street Scene front splitter, C7 Carbon ZL1 side skirts Drake Muscle Car wicker bill, Adams Polishes Ceramic Coating 2010 Infiniti G37x Sedan for the DD.

08-24-2018, 08:53 PM	#8
TJay74 Drives: 17 Camaro SS 1LE & 16 Sierra AT CC Join Date: Nov 2016 Location: Norman, OK Posts: 2,424	There is not one axleback out there that will void any of the OEM or extended warranty. AS long as the system installs after the secondary cats you are fine. __________________ 2019 Corvette Z06 2LZ A8 - Halltech CAI, AWE non-catted X-pipe, Mamo V2 ported TB 592rwhp, bone stock 566rwhp 2017 Camaro SS 1LE - Procharger D1SC w/ Tial 2" BOV & Race intercooler / ARH full length catless headers / Alky meth injection system - 650rwhp on conservative tune SOLD

08-21-2018, 07:41 PM	#2
Wierd Harold Drives: 2017 2lt rs Join Date: May 2017 Location: Ontario canada Posts: 332	From other posts I've seen these are made from gm by Borla

08-21-2018, 10:12 PM	#3
FoCoCamaro Drives: 2017 1SS 1LE (Krypton Green) Join Date: Mar 2017 Location: Fort Collins, Colorado Posts: 143	Adding any axleback exhuast will not void your warranty. You have a few more options that way too...

08-22-2018, 05:26 AM	#4
srcstc Drives: 2016 Camaro 2SS Join Date: Nov 2016 Location: North Jersey Posts: 603	I don't think there's anything they can deny you warranty coverage for because of an axle back. Sent from my iPhone using Tapatalk

08-23-2018, 10:14 AM	#7
dfwcowboy Drives: 2024 ZL1 M6, 1978 Beechcraft Baron Join Date: Jun 2018 Location: Dallas Posts: 371	I have those on my LT. I'm not sure what the differences are if any between the V6 and the V8, but they look identical on the outside. I'm quite happy with them. The sound isn't much at low RPM, but starts to sound quite nice at higher revs. The volume isn't that much louder than stock so if you're looking for loud you're better off with something else.

08-27-2018, 08:38 PM	#9
FL2018-1SS Drives: 2018 1SS Join Date: May 2018 Location: Orlando, FL Posts: 29	I just got my axle back Borla Type S for my 2018 1SS (non NPP). Cost $799 + install. My first mod and I tell ya I absolutely friggin love it. The sound matches the looks and the performance now. The GM parts IMHO seem overpriced at $1195.

User Name		Remember Me?
Password