|
|
#1 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '18 Zl1. '18 GT350. Join Date: Dec 2016
Location: Katy
Posts: 2,104
|
2nd Dyno Pull Set for Tomorrow. Guess my HP/Torque and get a $500 credit at Weapon X
Okay guys.
I'm scheduled to go in tomorrow for my 116 tune and 1 HP mod addition. I can't say what that mod is as it will make it a bit too easy to calculate the HP gain. My last pull was last week. 1044HP/871TQ on 93 and Meth. 24.2lbs of boost. So, from that, your guesses are welcome!!!!!! I will give one hint. We did do one hit on 116, no tune, but broke the dyno and it came back at 1090 hp, but didn't read out the tq # so. If that helps any. That was a no tune pull. We drained tank, put in 116, then did a hit. No tuning was done. Temps tomorrow should be around 92 degrees, so about 10 degrees cooler than when we did my last dyno hits. We will be doing a clean tank of 116 (7 gallons) and meth btw. We will be doing 2-3 pulls and Ill be posting up my highest dyno sheet. So, if you guess the HP and Torque, I'll cover a $500 credit at Weapon X. Good luck. I will put my own guess in. I say 1180HP/940TQ. (Even tho I'm hoping to see 1200/1000). I just don't think I'm going to pick up 130 ft lbs from 116, but u never know.
__________________
There's only 2 people I trust. 1 of them is me, the other's not you. 2018 Zl1. 1199 RWHP/931 TQ.
|
|
|
|
|
|
#2 |
![]() Drives: 17 garnet red 2ss vert Join Date: Apr 2018
Location: Highland Village, Tx.
Posts: 45
|
1154/ 925
|
|
|
|
|
|
#3 | |
![]() Drives: 2017 ZL1 Join Date: Nov 2009
Location: southeast
Posts: 72
|
Quote:
|
|
|
|
|
|
|
#4 |
![]() ![]() Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 926
|
1220/970
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
|
|
|
|
|
#5 |
|
Drives: Fast Join Date: Mar 2015
Location: Michigan
Posts: 3,696
|
1175 RWHP and 940 RWTQ.
Hope you hit your 1200/1000 on blower. I've never seen over 1100 RWHP with the F1A-94 blower, that's serious power. Most builds go F1X at that point. Let 'er rip! *Edit* Lol, didn't realize my guess is almost identical to yours. |
|
|
|
|
|
#6 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '18 Zl1. '18 GT350. Join Date: Dec 2016
Location: Katy
Posts: 2,104
|
__________________
There's only 2 people I trust. 1 of them is me, the other's not you. 2018 Zl1. 1199 RWHP/931 TQ.
|
|
|
|
|
|
#7 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '18 Zl1. '18 GT350. Join Date: Dec 2016
Location: Katy
Posts: 2,104
|
Quote:
Why, the F1a-94 is good for 1250 so. F1X goes to 1400+ from what I've seen. Yep, our guesses are about the same. Damn nearly spot on. We won't crank it up until we built the bottom end, but for now we gonna keep it at 24lbs.
__________________
There's only 2 people I trust. 1 of them is me, the other's not you. 2018 Zl1. 1199 RWHP/931 TQ.
|
|
|
|
|
|
|
#8 |
![]() Drives: 2017 Red Hot ZL1 Join Date: May 2015
Location: Metro Detroit
Posts: 216
|
1173/938
|
|
|
|
|
|
#9 |
|
Drives: Fast Join Date: Mar 2015
Location: Michigan
Posts: 3,696
|
I don't know if I've seen any cam only LT4s doing 1100 RWHP or more with the F1A-94. Usually when Vengeance, RPM, etc. put together this setup, it's 950 on pump, 1050 on E85 or race gas etc. Your car makes great power. We're gonna need some dash videos uploaded to your channel to demonstrate the power of this thing.
|
|
|
|
|
|
#10 |
![]() Drives: '18 RH ZL1 1LE Join Date: Apr 2018
Location: On The Edge
Posts: 323
|
1207 hp / 1002 lb/ft
|
|
|
|
|
|
#11 |
![]() Drives: ZL1/1LE parts added Join Date: May 2018
Location: Somewhere around Texas pines tress and smooth asphalt
Posts: 627
|
1120 HP/947 TQ !
|
|
|
|
|
|
#12 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '18 Zl1. '18 GT350. Join Date: Dec 2016
Location: Katy
Posts: 2,104
|
Quote:
I agree, but that's up to Matt and he's freaking real picky on letting people there while he does the pulls. But, he said I could come by tomorrow and record so. RPM if I recall got close to 1300 on 116, but their motor is fully built. Which was what I'm chasing btw. I think they've set the high mark. Now, Frostbite, I forgot their numbers, but he's putting down a 9.1 at the track so. That's also who we are chasing. I won't get into too much SR on this forum as they don't like SR videos, but I've gone out 3 times already and stepped up with some of the bigger players in Houston. I ran Nick in his 950 HP Supra, but he's 3100 lbs with him in it. He gapped me by a good 3 cars, but he didn't come around until the big end then he just kept pulling. I ran Dan's Powerfab built Zl1, he's 780 to the wheels, that was a murder fest. Got him by buses. 2 nights ago I ran Boyd and his 950 hp Coyote with about 200 lbs shaved out of it, so he had a pretty good weight advantage. I got him by a fender so. And we ran it out to over 150. I actually added weight with the BMR suspension. I think I added a good 100 lbs with the new set up and new suspension so. With me in the car, I'm easily 4000lbs + so. I need a good 1200 hp to run with these gutted street cars cus I'm not gonna tear any interior out.
__________________
There's only 2 people I trust. 1 of them is me, the other's not you. 2018 Zl1. 1199 RWHP/931 TQ.
|
|
|
|
|
|
|
#13 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '18 Zl1. '18 GT350. Join Date: Dec 2016
Location: Katy
Posts: 2,104
|
__________________
There's only 2 people I trust. 1 of them is me, the other's not you. 2018 Zl1. 1199 RWHP/931 TQ.
|
|
|
|
|
|
#14 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '18 Zl1. '18 GT350. Join Date: Dec 2016
Location: Katy
Posts: 2,104
|
Quote:
Yea, I need to get some GoPro's or have someone ride with me when I go out so I can video more gaptism's. I do have a few runs lined up hopefully this weekend, weather permitting against a F1X C7Z and a FB0 Zr1 and a FBO TA Viper. We'll see how that goes.
__________________
There's only 2 people I trust. 1 of them is me, the other's not you. 2018 Zl1. 1199 RWHP/931 TQ.
|
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|