[18LTLoveIt]

Washed the hood and tops of fenders and bumper upper & lower lip from dust this weekend.

[GermanMuscle]

Things I did last week:
- Plasti-dipped all emblems matte black
- Tinted head lights
- Tinted DRLs
- Tinted rear reflectors
- Wrapped chrome accents under DRLs in Lime Green
- GM Dark Finish Tail Lights
- GM Dark Finish 3rd Brake Light
- Smoked LED Side Markers
- MRR M228s 20/9 in the front and 20/10 in the rear
- Michelin Super Sports 295/35/20 rear, 265/35/20 front

Soon:
- Paint brake calipers lime green
- Street Scene Body Kit
- Eibach Lowering Springs

Hopefully one day :
- Phase 2 Forced Induction with Procharger by Redline Motorsports

[LuvMI]

Lime green accents? Pretty.

[Bad Anvil Garage]

You need black exhaust tips.

[crosive]

replaced stock ss wing with satin black zl1 wing. Had to do a quick wash to get the fingerprints off and throw some hydro2 on it. Also checked for leaks to make sure everything sealed up properly.

the wing came satin black, but I'm on the fence about painting it.

[GermanMuscle]

Originally Posted by Bad Anvil Garage

You need black exhaust tips.

Any recommendations?

[ChevyRules]

Got Xpel Ultimate done on the rocker panels. But discovered a bubble and part of it peeling after getting home. :(


https://i.imgur.com/gb4E1Qk.jpg


https://i.imgur.com/PhwneJG.jpg

[Ryanbabz71]

Few new things





Getting supplies for my 1,500 mile service






Ryan B.

[dfwcowboy]

Originally Posted by ChevyRules

Got Xpel Ultimate done on the rocker panels. But discovered a bubble and part of it peeling after getting home. :(

According to my XPEL installer, this is not unusual. They advised me to run my finger around the edges during the first week to aid in adhesion and any bubbles should work their way out in the first month. If I still had any defects after 30 days they would repair or replace any sections. I did not have this problem, but there were a couple of cars coming in for touch ups while I was in so I suppose it’s common enough that you may need it.

[zr1chris]

Originally Posted by Ryanbabz71

Few new things





]




Ryan B.

Love that info plate!! Where did you get it????

[Ryanbabz71]

Originally Posted by zr1chris

Love that info plate!! Where did you get it????

Guy on Facebook makes them.


Ryan B.

[1hprush]

Thanks to Steve @RDPmotorsports, for having a great July sale! I picked up this Carbon Borla Atak and absolutely love it! Also a shout out to Matt @wildhammermotorsports for a great set of dark reflectors too. I went from a dual exhaust to the quads, so I went with the GM quad valance and had it painted gloss black, car is NFG.

[ChevyRules]

Originally Posted by dfwcowboy

According to my XPEL installer, this is not unusual. They advised me to run my finger around the edges during the first week to aid in adhesion and any bubbles should work their way out in the first month. If I still had any defects after 30 days they would repair or replace any sections. I did not have this problem, but there were a couple of cars coming in for touch ups while I was in so I suppose it’s common enough that you may need it.

That is what I found out based on research with the bubble. I emailed the guys with pictures of it. Now I fear since I couldn't beat the rain storm home, as you can see in the pictures dirt kicked up into the peeling part. So it probably won't adhere anymore to the car.

[18LTLoveIt]

Ordered custom License Plate for my 18.."2018 RS".