Afr o2 placment?

SanDMaN2091 · 06-12-2018, 08:07 PM

Ceracoating my catless headers this week and i know ill want an air fuel gauge in the future so im going to weld a bung and cap it for now just not sure the placement ive seen alot of people say drivers side close to factory o2 but nothing about before or after, or angle upstream or down.... any help would be much appreciated. Thanks guys

danhr · 06-12-2018, 08:16 PM

I put mine on the drivers side, between the first o2 sensor and the second. Went and picked up a m18-1.5 oil pan plug at the local parts store, to use as a plug.

SanDMaN2091 · 06-12-2018, 11:06 PM

So I've deleted 2nd cats already and the tsp 1 7-8 only have one o2 on each angled downstream a bit. Would that put the 2nd o2 in the connecting pipe?

danhr · 06-12-2018, 11:18 PM

Yes.

Both of my downstream cats and my wideband bung are in my connecting pipes.

SanDMaN2091 · 06-13-2018, 07:21 AM

Quote:

Originally Posted by danhr

Yes.

Both of my downstream cats and my wideband bung are in my connecting pipes.

Thanks man I was kinda clueless

parbreak · 06-13-2018, 03:22 PM

Driver's side in the header just past factory O2

SanDMaN2091 · 06-13-2018, 06:00 PM

Quote:

Originally Posted by parbreak

Driver's side in the header just past factory O2

Worth a thousand words.. I appreciate it man

parbreak · 06-14-2018, 02:01 PM

Quote:

Originally Posted by SanDMaN2091

Worth a thousand words.. I appreciate it man

No problem. And you can fish the wiring through the sound tube hole.

06-12-2018, 08:07 PM	#1
SanDMaN2091 Drives: 2016 Camaro SS A8 NPP Join Date: Nov 2016 Location: Dallas, Tx Posts: 145 View My Garage	Afr o2 placment? Ceracoating my catless headers this week and i know ill want an air fuel gauge in the future so im going to weld a bung and cap it for now just not sure the placement ive seen alot of people say drivers side close to factory o2 but nothing about before or after, or angle upstream or down.... any help would be much appreciated. Thanks guys __________________ DMS Flex Fuel-E85 HPTuners Ngauge Roto Fab CAI, *LPE* Ported/Polished 95mm LT5Throttle Body, *PRAY* Ported MSD Intake Manifold, SP Coated TSP 1 7/8" Catlless Longtubes Hooker BlackHeart Cat-Back, Mishimoto Catch Can (Which always has some nasty in it) *Instagram@Weapon_6*

06-12-2018, 11:06 PM	#3
SanDMaN2091 Drives: 2016 Camaro SS A8 NPP Join Date: Nov 2016 Location: Dallas, Tx Posts: 145 View My Garage	So I've deleted 2nd cats already and the tsp 1 7-8 only have one o2 on each angled downstream a bit. Would that put the 2nd o2 in the connecting pipe? Attached Images __________________ DMS Flex Fuel-E85 HPTuners Ngauge Roto Fab CAI, *LPE* Ported/Polished 95mm LT5Throttle Body, *PRAY* Ported MSD Intake Manifold, SP Coated TSP 1 7/8" Catlless Longtubes Hooker BlackHeart Cat-Back, Mishimoto Catch Can (Which always has some nasty in it) *Instagram@Weapon_6*

06-13-2018, 03:22 PM	#6
parbreak Drives: 2017 50th Camaro SS Join Date: Jul 2016 Location: Maryland Posts: 525	Driver's side in the header just past factory O2 Attached Images __________________ 50th Anniversary Edition \|Borla Atak and 60606 mid pipes\| Kooks 1 7/8" \| ProCharger Stage II \|305/45/17 DRs \| Circle D 3500 stall \| LT4 fueling \| Custom made Lowside Aux Pump \| Alky Control Meth \| DSX E85

06-12-2018, 08:16 PM	#2
danhr BAMF SS Drives: 2016 Camaro 1SS A8 Join Date: Mar 2010 Location: Ford City, PA Posts: 3,024	I put mine on the drivers side, between the first o2 sensor and the second. Went and picked up a m18-1.5 oil pan plug at the local parts store, to use as a plug.

06-12-2018, 11:18 PM	#4
danhr BAMF SS Drives: 2016 Camaro 1SS A8 Join Date: Mar 2010 Location: Ford City, PA Posts: 3,024	Yes. Both of my downstream cats and my wideband bung are in my connecting pipes.

User Name		Remember Me?
Password