Club F1FTY - Page 637

Billabongi · 06-09-2018, 12:08 PM

I am looking to pick up some race ramps and want to make sure I am getting the right ones. The ones you guys are using without issue with the splitter or air dams are Race Ramps RR-56-2 right? Also any reason these couldn't support a Colorado in the future as well? They support 1500 pounds per so I think i'm covered but figured I'd ask as well.

KyBoy · 06-09-2018, 12:19 PM

Quote:

Originally Posted by Billabongi

I am looking to pick up some race ramps and want to make sure I am getting the right ones. The ones you guys are using without issue with the splitter or air dams are Race Ramps RR-56-2 right? Also any reason these couldn't support a Colorado in the future as well? They support 1500 pounds per so I think i'm covered but figured I'd ask as well.

Give me a bit and I'll go look at mine to make sure.

Heath

KyBoy · 06-09-2018, 01:03 PM

Quote:

Originally Posted by Billabongi

I am looking to pick up some race ramps and want to make sure I am getting the right ones. The ones you guys are using without issue with the splitter or air dams are Race Ramps RR-56-2 right? Also any reason these couldn't support a Colorado in the future as well? They support 1500 pounds per so I think i'm covered but figured I'd ask as well.

Mine are 56", they come very close to the little air deflectors, but they do not touch as long as I go real slow. I'm not lowered.

Heath

Soleil · 06-09-2018, 01:54 PM

Quote:

Originally Posted by HartfordRacingCaptain

Bought a house about a month ago. This was one of the first projects:

Congratulations

very well done my friend. What was the second project? Your bed room?

HartfordRacingCaptain · 06-09-2018, 03:51 PM

Quote:

Originally Posted by RicSimonis

Nice transformation. Like the bow tie in the floor.

Quote:

Originally Posted by 1hprush

Very Impressive! However, I see nothing fun about that project at all

Quote:

Originally Posted by CamaroSS50

Nicely done.

I've got a 2 car garage, wish I could get 1 car in.

Project: need to get rid of stuff...

Quote:

Originally Posted by Soleil

Congratulations

very well done my friend. What was the second project? Your bed room?

Thanks everyone! Its fun when you look back and see what your work did haha.

Second project was painting what used to be a tv room, but is now my bedroom. I rent my other 2 bedrooms out to college friends.

Then like i said i am currently working on installing a patio:

Soleil · 06-09-2018, 05:09 PM

If you put the wood sticks let say 5” further away of the planed perimeter and use a string around you will have always the perfect measurements (+5”) with a hose water level you can mark the right hight. Remember you need 1%-2% declination or you will have puddle of water after a rain.

Kaizer_911 · 06-09-2018, 06:48 PM

My Camaro Club, Bluff City Camaro Club, went out and visited a nice gentleman at a retirement home who is crazy about Camaros. We had a few 5th and 6th gens (Including 2 ZL1, my 50th, and a Hot Wheels). His favorite one??? The 50th of course! And I took him for a ride.

We also gave him a “gift basket”. It contained: A hat, 2 Hot Wheels, a signed 50th diecast (signed by Al O), and an official club shirt.

Here are some links...

And you do NOT have to have a Facebook account to view these. It was too much to post here.

Photos: https://www.facebook.com/media/set/?...1&l=6b9424b8ab

Video 01: https://www.facebook.com/plugins/vid...97210193712237

Video 02: https://www.facebook.com/plugins/vid...97210863712170

Video 03: https://www.facebook.com/plugins/vid...97211453712111

Video 04: https://www.facebook.com/plugins/vid...97213200378603

Sent from my iPhone using Tapatalk

KyBoy · 06-09-2018, 07:15 PM

Quote:

Originally Posted by Kaizer_911

My Camaro Club, Bluff City Camaro Club, went out and visited a nice gentleman at a retirement home who is crazy about Camaros. We had a few 5th and 6th gens (Including 2 ZL1, my 50th, and a Hot Wheels). His favorite one??? The 50th of course! And I took him for a ride.

We also gave him a “gift basket”. It contained: A hat, 2 Hot Wheels, a signed 50th diecast (signed by Al O), and an official club shirt.

Here are some links...

And you do NOT have to have a Facebook account to view these. It was too much to post here.

Photos: https://www.facebook.com/media/set/?...1&l=6b9424b8ab

Video 01: https://www.facebook.com/plugins/vid...97210193712237

Video 02: https://www.facebook.com/plugins/vid...97210863712170

Video 02: https://www.facebook.com/plugins/vid...97211453712111

Video 04: https://www.facebook.com/plugins/vid...97213200378603

Sent from my iPhone using Tapatalk

Wow, that's a great time. Good Karma for you guys!

Heath

KyBoy · 06-09-2018, 09:25 PM

Got to apply these to the wife's 1SS tomorrow. Redline emblems.

Heath

HartfordRacingCaptain · 06-09-2018, 10:13 PM

Quote:

Originally Posted by Soleil

If you put the wood sticks let say 5” further away of the planed perimeter and use a string around you will have always the perfect measurements (+5”) with a hose water level you can mark the right hight. Remember you need 1%-2% declination or you will have puddle of water after a rain.

Those sticks were just for me to start digging. I have string and a level to perform the proper leveling. I have a small army coming tomorrow to help haha, that progress so far was me alone.

Billabongi · 06-09-2018, 10:40 PM

Quote:

Originally Posted by KyBoy

Mine are 56", they come very close to the little air deflectors, but they do not touch as long as I go real slow. I'm not lowered.

Heath

Thanks!

Kaizer_911 · 06-09-2018, 11:43 PM

Quote:

Originally Posted by KyBoy

Wow, that's a great time. Good Karma for you guys!

Heath

Thanks Heath!

Those Redline emblems looks cool too.

Sent from my iPhone using Tapatalk

Wolfco13 · 06-10-2018, 12:40 AM

Quote:

Originally Posted by Kaizer_911

My Camaro Club, Bluff City Camaro Club, went out and visited a nice gentleman at a retirement home who is crazy about Camaros. We had a few 5th and 6th gens (Including 2 ZL1, my 50th, and a Hot Wheels). His favorite one??? The 50th of course! And I took him for a ride.

We also gave him a “gift basket”. It contained: A hat, 2 Hot Wheels, a signed 50th diecast (signed by Al O), and an official club shirt.

Here are some links...

And you do NOT have to have a Facebook account to view these. It was too much to post here.

Photos: https://www.facebook.com/media/set/?...1&l=6b9424b8ab

Video 01: https://www.facebook.com/plugins/vid...97210193712237

Video 02: https://www.facebook.com/plugins/vid...97210863712170

Video 02: https://www.facebook.com/plugins/vid...97211453712111

Video 04: https://www.facebook.com/plugins/vid...97213200378603

Sent from my iPhone using Tapatalk

That was cool!

Kaizer_911 · 06-10-2018, 01:00 AM

Quote:

Originally Posted by Wolfco13

That was cool!

Thanks. It was a lot of fun and it felt great to make his day.

Sent from my iPhone using Tapatalk

06-09-2018, 12:08 PM	#8905
Billabongi Drives: '17 SS 50th Camaro Join Date: Apr 2012 Location: Tampa, Florida Posts: 921	I am looking to pick up some race ramps and want to make sure I am getting the right ones. The ones you guys are using without issue with the splitter or air dams are Race Ramps RR-56-2 right? Also any reason these couldn't support a Colorado in the future as well? They support 1500 pounds per so I think i'm covered but figured I'd ask as well. __________________ 2017 50th Anniversary 2LT\RS - #1583 SOLD 2017 50th Anniversary 2SS - #3410

06-09-2018, 05:09 PM	#8910
Soleil Drives: Camaro 50th anniversary edition Join Date: May 2017 Location: Europe Posts: 2,203 View My Garage	If you put the wood sticks let say 5” further away of the planed perimeter and use a string around you will have always the perfect measurements (+5”) with a hose water level you can mark the right hight. Remember you need 1%-2% declination or you will have puddle of water after a rain. __________________ Soleil _____________________________________________ A car is fast enough, if you fear to unlock it in the morning." (Walter Roehrl)

06-09-2018, 06:48 PM	#8911
Kaizer_911 Drives: 2017 2SS 50th Anniversary Edition Join Date: Aug 2011 Location: Northwest, AR Posts: 7,396 View My Garage	Club F1FTY My Camaro Club, Bluff City Camaro Club, went out and visited a nice gentleman at a retirement home who is crazy about Camaros. We had a few 5th and 6th gens (Including 2 ZL1, my 50th, and a Hot Wheels). His favorite one??? The 50th of course! And I took him for a ride. We also gave him a “gift basket”. It contained: A hat, 2 Hot Wheels, a signed 50th diecast (signed by Al O), and an official club shirt. Here are some links... And you do NOT have to have a Facebook account to view these. It was too much to post here. Photos: https://www.facebook.com/media/set/?...1&l=6b9424b8ab Video 01: https://www.facebook.com/plugins/vid...97210193712237 Video 02: https://www.facebook.com/plugins/vid...97210863712170 Video 03: https://www.facebook.com/plugins/vid...97211453712111 Video 04: https://www.facebook.com/plugins/vid...97213200378603 Sent from my iPhone using Tapatalk __________________ 2017 50th Anniversary Edition 2SS - #TeamBeckyD 1100 - 04/29/16 \| 2000 - 05/03/16 3000 - 05/04/16 \| TPW 6/6 - 05/09/16 3100 - 05/25/16 \| 3300 - 05/28/16 3400 - 05/31/16 \| 3800 - 06/14/16, #125 Built! 4200 - 06/29/16 \| 5000 - 06/29/16 6000 - 07/08/16 \| Club F1FTY Last edited by Kaizer_911; 06-11-2018 at 03:12 PM. Reason: I forgot how to count

06-09-2018, 09:25 PM	#8913
KyBoy Drives: '17 2SS H50 Join Date: Mar 2016 Location: Louisa, Ky Posts: 3,952	Got to apply these to the wife's 1SS tomorrow. Redline emblems. Heath __________________ 2017 H50-2SS-MN6-F55-NPP-RIK-WL4-IO6 1100 - 5/26 0000 - Cancelled - 7/5 Contacted Becky - 7/1 2000 - 7/5 3000 - 7/6 3000 - 7/11 TPW 8/1 3100 - 7/18 TPW 8/1 3300 - 7/20 3400 - 7/21 Built - 8/2 - PS 1,182/1 of 699US 4300 - 8/3 5000 - 8/5 6000 - 8/13

User Name		Remember Me?
Password