You are browsing camaro6 
05-22-2018, 12:48 PM
|
#1 |
  
Drives: '17 Red hot 2ss, 16 Focus RS Join Date: Aug 2015
Location: Michigan
Posts: 845
|
Valve spring tool
I need a valve spring compressor tool. Are there any for under $100. If not I'll just bring it to a shop to have the swap done
__________________
"Spitfire" 427ci
2017 Red Hot 2SS// 6 Piston Brembos//Adrenaline Red Interior, Knee Pads//M6//MRC Afe Air Filter//BMR MM010 Motor Mounts, Safety Loop//Custom OTR Intake//Flex Fuel Kit//Gforce 3.5" Aluminum Driveshaft//GM 95mm TB//Katech Oil Pump, Piston Squirters//Kooks 1-7/8 LT//LT4 Fueling//Mighty Mouse Wild//Monster Clutch LT1-S Triple Disc//MSD 2-Step//Pray Performance Custom Spec Cam, Ported Holley Hi-Ram//Sikky 12" Shifter w OEM Knob Mod//Tick Level 1 Tr6060//Labor by Me//Tune By Pray Performance |
|
|
|
05-22-2018, 12:53 PM
|
#2 |
 Drives: '17 1ss m6 Join Date: May 2018
Location: Arkansas
Posts: 17
|
I used this cheap ebay one for gen 3 motors. It worked fine for me, just keep it lubricated and take your time.
|
|
|
|
|
05-22-2018, 02:52 PM
|
#3 | |
|
Drives: '17 Red hot 2ss, 16 Focus RS Join Date: Aug 2015
Location: Michigan
Posts: 845
|
Quote:
__________________
"Spitfire" 427ci
2017 Red Hot 2SS// 6 Piston Brembos//Adrenaline Red Interior, Knee Pads//M6//MRC Afe Air Filter//BMR MM010 Motor Mounts, Safety Loop//Custom OTR Intake//Flex Fuel Kit//Gforce 3.5" Aluminum Driveshaft//GM 95mm TB//Katech Oil Pump, Piston Squirters//Kooks 1-7/8 LT//LT4 Fueling//Mighty Mouse Wild//Monster Clutch LT1-S Triple Disc//MSD 2-Step//Pray Performance Custom Spec Cam, Ported Holley Hi-Ram//Sikky 12" Shifter w OEM Knob Mod//Tick Level 1 Tr6060//Labor by Me//Tune By Pray Performance |
|
|
|
|
|
05-22-2018, 05:13 PM
|
#4 | |
|
Drives: '17 1ss m6 Join Date: May 2018
Location: Arkansas
Posts: 17
|
Quote:
|
|
|
|
|
|
05-22-2018, 08:08 PM
|
#5 |
|
Drives: '17 Red hot 2ss, 16 Focus RS Join Date: Aug 2015
Location: Michigan
Posts: 845
|
Thank you very much!
__________________
"Spitfire" 427ci
2017 Red Hot 2SS// 6 Piston Brembos//Adrenaline Red Interior, Knee Pads//M6//MRC Afe Air Filter//BMR MM010 Motor Mounts, Safety Loop//Custom OTR Intake//Flex Fuel Kit//Gforce 3.5" Aluminum Driveshaft//GM 95mm TB//Katech Oil Pump, Piston Squirters//Kooks 1-7/8 LT//LT4 Fueling//Mighty Mouse Wild//Monster Clutch LT1-S Triple Disc//MSD 2-Step//Pray Performance Custom Spec Cam, Ported Holley Hi-Ram//Sikky 12" Shifter w OEM Knob Mod//Tick Level 1 Tr6060//Labor by Me//Tune By Pray Performance |
|
|
|
|
05-23-2018, 02:48 AM
|
#6 |
        Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,346
|
I got the one that can do both, it also puts less stress on factory boss. I posted the thread about two weeks ago.
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
|
|
|
|
05-23-2018, 03:09 AM
|
#7 | |
|
Drives: '17 Red hot 2ss, 16 Focus RS Join Date: Aug 2015
Location: Michigan
Posts: 845
|
Quote:
__________________
"Spitfire" 427ci
2017 Red Hot 2SS// 6 Piston Brembos//Adrenaline Red Interior, Knee Pads//M6//MRC Afe Air Filter//BMR MM010 Motor Mounts, Safety Loop//Custom OTR Intake//Flex Fuel Kit//Gforce 3.5" Aluminum Driveshaft//GM 95mm TB//Katech Oil Pump, Piston Squirters//Kooks 1-7/8 LT//LT4 Fueling//Mighty Mouse Wild//Monster Clutch LT1-S Triple Disc//MSD 2-Step//Pray Performance Custom Spec Cam, Ported Holley Hi-Ram//Sikky 12" Shifter w OEM Knob Mod//Tick Level 1 Tr6060//Labor by Me//Tune By Pray Performance Last edited by Dubchitts; 05-23-2018 at 12:46 PM. |
|
|
|
|
|
05-23-2018, 10:03 PM
|
#8 |
|
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,346
|
GPI takes about two to two and three hours so if the shop is doing it for 100 bucks they misquoted you. Can’t run on AFM lifters though
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
|
|
|
|
05-23-2018, 10:13 PM
|
#9 | |
|
Drives: '17 Red hot 2ss, 16 Focus RS Join Date: Aug 2015
Location: Michigan
Posts: 845
|
Quote:
__________________
"Spitfire" 427ci
2017 Red Hot 2SS// 6 Piston Brembos//Adrenaline Red Interior, Knee Pads//M6//MRC Afe Air Filter//BMR MM010 Motor Mounts, Safety Loop//Custom OTR Intake//Flex Fuel Kit//Gforce 3.5" Aluminum Driveshaft//GM 95mm TB//Katech Oil Pump, Piston Squirters//Kooks 1-7/8 LT//LT4 Fueling//Mighty Mouse Wild//Monster Clutch LT1-S Triple Disc//MSD 2-Step//Pray Performance Custom Spec Cam, Ported Holley Hi-Ram//Sikky 12" Shifter w OEM Knob Mod//Tick Level 1 Tr6060//Labor by Me//Tune By Pray Performance |
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
