What did you do to your 6th Gen Camaro today?! - Page 373

coruiz · 05-22-2018, 10:46 AM

Installed the GMPP CAI

Name: IMG_9026.jpg
Views: 1078
Size: 303.5 KB

SnakeEyeSS · 05-22-2018, 02:29 PM

Looks great. They look the best. Shame that no one has found any real power gain with them. Rotofab may only be a 7-10 gain, but the independent dynos show it and IMO I'll take that over the looks, even if it's unnoticeable.

mendocino · 05-22-2018, 07:05 PM

Quote:

Originally Posted by VAZL1

The new stripes look much better, nice job!

Thank you. I have to re-do it again. I like to try black vinyl. And a little later I'll - paint.

Oh, yes, what else have I done with my Camaro today? I found a genuine leather case for user manual.

grampa_ss · 05-22-2018, 07:21 PM

Where did you find that case?

devnull · 05-22-2018, 08:43 PM

Quote:

Originally Posted by Cgocifer

Nice! That play house across the street looks nicer than my house! Lol

HAHA, he built that from scratch. VERY IMPRESSIVE!!!

Quote:

Originally Posted by starscream5000

Your avatar looks familiar, did you used to be on supramania.com?

Hmmm, not that one. I use that avatar everywhere though (CorvetteForum, mustang6g, 1911, etc lol)... Been using it since the 90's!

Hitman84 · 05-22-2018, 09:18 PM

Quote:

Originally Posted by mendocino

Thank you. I have to re-do it again. I like to try black vinyl. And a little later I'll - paint.

Oh, yes, what else have I done with my Camaro today? I found a genuine leather case for user manual.

who do I have to pay for one of these?

sstormtrooper · 05-22-2018, 09:43 PM

-Blacked out my brake lights with VHT (fingers crossed daily that I don't get a ticket cause it's going to be a pain to fix)
-Blacked out my third brake light with very nice high quality vinyl thanks to BIGWORMGRAPHIX.com!
-Blacked out all my reflectors with a $20 precut set on ebay. Definitely not as thick as the one I got from Bigwormgraphix but we'll see how they last over time. They look good still.
-Blacked out my bowtie with Plastidip. Plastidip gets hated on a lot but I think this turned out a lot better than if I had used vinyl and a lot cheaper and time efficient than completely replacing it.

chiefmg · 05-22-2018, 09:52 PM

Plastidipped the wheels (black sapphire), oil/filter change, installed the used smoked tail lights/third brake light I bought off this forum. Also managed to misjudge things pulling into the drive and dinged the passenger rear fender against our CX-5. Now I get to see if the dealer we bought it from has a good PDR person, and if they can do something with this. Luckily my wife wasn't pissed about it.

Cgocifer · 05-23-2018, 12:48 AM

Quote:

Originally Posted by chiefmg

Plastidipped the wheels (black sapphire), oil/filter change, installed the used smoked tail lights/third brake light I bought off this forum. Also managed to misjudge things pulling into the drive and dinged the passenger rear fender against our CX-5. Now I get to see if the dealer we bought it from has a good PDR person, and if they can do something with this. Luckily my wife wasn't pissed about it.

Pics of wheels please

Martinjlm · 05-23-2018, 08:21 AM

Quote:

Originally Posted by chiefmg

Plastidipped the wheels (black sapphire), oil/filter change, installed the used smoked tail lights/third brake light I bought off this forum. Also managed to misjudge things pulling into the drive and dinged the passenger rear fender against our CX-5. Now I get to see if the dealer we bought it from has a good PDR person, and if they can do something with this. Luckily my wife wasn't pissed about it.

Mustang fanboys waving the “you can’t see out of it” flag in 3....2....1....

craigss50 · 05-23-2018, 11:06 AM

Quote:

Originally Posted by mendocino

Thank you. I have to re-do it again. I like to try black vinyl. And a little later I'll - paint.

Oh, yes, what else have I done with my Camaro today? I found a genuine leather case for user manual.

Yes nice case where did you get it?

coruiz · 05-23-2018, 11:11 AM

Quote:

Originally Posted by SnakeEyeSS

Looks great. They look the best. Shame that no one has found any real power gain with them. Rotofab may only be a 7-10 gain, but the independent dynos show it and IMO I'll take that over the looks, even if it's unnoticeable.

True, it sounds good to me so I'm happy but def Roto Fab is the way to go for power.

Ryanbabz71 · 05-25-2018, 04:36 AM

Ryan B.

rap47 · 05-25-2018, 07:57 AM

Quote:

Originally Posted by coruiz

True, it sounds good to me so I'm happy but def Roto Fab is the way to go for power.

Not so sure about that.......

05-22-2018, 10:46 AM	#5209
coruiz Drives: 2018 Camaro 2SS Hyper Blue Join Date: Apr 2018 Location: Tampa, FL Posts: 265 View My Garage	Installed the GMPP CAI __________________ 2018 Camaro 2SS \| Hyper Blue Metallic \| A8 \| NPP \| MRC \| NAV \| HUD \| ATAK \|

05-22-2018, 02:29 PM	#5210
SnakeEyeSS Drives: Camaro 2SS & ZL1 Join Date: Mar 2018 Location: Oklahoma Posts: 876	Looks great. They look the best. Shame that no one has found any real power gain with them. Rotofab may only be a 7-10 gain, but the independent dynos show it and IMO I'll take that over the looks, even if it's unnoticeable. __________________ 2017 Camaro 2SS A8 Bright Yellow NPP MRC 2023 Camaro ZL1 A10 Radiant Red

05-22-2018, 07:21 PM	#5212
grampa_ss Drives: 2016 Camaro 2SS Join Date: Apr 2017 Location: Stansbury Park, Utah Posts: 1,102	Where did you find that case? __________________ 2016 2SS, MRC, NPP, A8. Procharger P-1X,Stage II,std bypass, 3.9, Alky Meth - 10.84 @129 - DA+2000 New Mods - GPI drop ins, Kooks 2", LT4 fueling, Cam, Circle D Converter, 3.5 pulley & dual nozzle meth.

05-22-2018, 09:43 PM	#5215
sstormtrooper Drives: Camaro 2SS Join Date: Apr 2018 Location: NV Posts: 15	-Blacked out my brake lights with VHT (fingers crossed daily that I don't get a ticket cause it's going to be a pain to fix) -Blacked out my third brake light with very nice high quality vinyl thanks to BIGWORMGRAPHIX.com! -Blacked out all my reflectors with a $20 precut set on ebay. Definitely not as thick as the one I got from Bigwormgraphix but we'll see how they last over time. They look good still. -Blacked out my bowtie with Plastidip. Plastidip gets hated on a lot but I think this turned out a lot better than if I had used vinyl and a lot cheaper and time efficient than completely replacing it. Attached Images

05-25-2018, 04:36 AM	#5221
Ryanbabz71 Drives: 2021 ZL1 1LE Satin Steel Join Date: Jul 2011 Location: Brownsburg, Indiana Posts: 6,369 View My Garage	Ryan B. __________________ Ryan 2021 ZL1 1LE Satin Steel Metallic Build Page: https://www.camaro6.com/forums/showthread.php?t=632481

05-22-2018, 09:52 PM	#5216
chiefmg Drives: 2016 2SS vert (wife's) Join Date: Jan 2018 Location: N KY Posts: 471	Plastidipped the wheels (black sapphire), oil/filter change, installed the used smoked tail lights/third brake light I bought off this forum. Also managed to misjudge things pulling into the drive and dinged the passenger rear fender against our CX-5. Now I get to see if the dealer we bought it from has a good PDR person, and if they can do something with this. Luckily my wife wasn't pissed about it.

User Name		Remember Me?
Password