Recall #17457 - Page 3

Gunkk · 05-08-2018, 12:46 PM

Anyone got pics ?

I'd rather do this fix myself than take it to a dealer and suffer the consequences.

DevilsReject97 · 05-08-2018, 01:29 PM

Stopped in to my dealer to inquire about this. It is VIN specific, so it does not apply to all cars. Call in and inquire about it with your VIN, they should be able to tell you over the phone.

17CamaroZL1 · 05-08-2018, 01:40 PM

Quote:

Originally Posted by Nsxmatt

People.. it's NOT a recall. It's a service bulletin. Big difference.

Tell that to the dealers. They are the ones telling us it's a recall.

Dethsupp0rt · 05-08-2018, 01:41 PM

Quote:

Originally Posted by 17CamaroZL1

Tell that to the dealers. They are the ones telling us it's a recall.

Can confirm, both SAs I talked to specifically called it a recall, even though the document shown is clearly a TSB.

NITEMER · 05-09-2018, 08:52 AM

They tell me it was a recall and not a TSB but its the dealer so take it for what its worth, if it causes stalls and no restarts it should be a recall and it is a safety issue. I have gotten random fault codes for traction control, rear diff etc, but no stalls yet.

Biscuit.fr · 05-09-2018, 06:54 PM

Recall, TSB
Who cares?
Some of you did it, put the pictures and the process,
Please
We can share....

Nsxmatt · 05-09-2018, 07:47 PM

Quote:

Originally Posted by Biscuit.fr

Recall, TSB
Who cares?
Some of you did it, put the pictures and the process,
Please
We can share....

Because a tsb only applies under warranty and you have a time and mileage table to get it covered for free. A recall is a safety issue not limited by time or mileage.

Biscuit.fr · 05-10-2018, 09:22 AM

Ok
It appears to be a TSB sorry....
Just come back from the dealer
I have everything printed
Looks easy to do it ....
I will post it here as soon as I’m home and know how to post pictures.......
Just need electrical protection + tape

Chevyman2 · 05-10-2018, 09:54 AM

Went to the dealer to get this done on zl1 the addition of wire management is under the belly pan and underhood passenger side. The wire management has clip attached to clip on bolt nearby.

Biscuit.fr · 05-10-2018, 11:33 AM

Biscuit.fr · 05-13-2018, 09:19 PM

Did it myself this morning.
Took my time.
Put the car on the ramp
Remove all the under protections
Including the center aluminium one, to have an easy access.
Had to disconnect the 2 connections of the steering like the pictures in order to play comfortably with the cable. (Not the upper one).
Added the 2 protections (about 5 cm each) and wrapped the total with electrical cloth tape.
Reconnected and refixed all the under protections.
Done
Difficulty on a scale 1-10 I will say 6.
My big fingers didn’t help to put the tape...
Took me hard time to remove and refix the wire retainer on the A/C compressor.
Total took me 2-3 hrs
Didn’t want to screw anything
Reviewed all other connections and added some tape to secure more....

dwill8335 · 05-15-2018, 07:14 PM

It shows up in dealer system as a recall, will have mine fixed Saturday.

Nsxmatt · 05-16-2018, 08:21 AM

Quote:

Originally Posted by dwill8335

It shows up in dealer system as a recall, will have mine fixed Saturday.

No it doesn't, I'm looking right at it right now and it clearly says it's a service update.

soceur77 · 05-16-2018, 09:15 AM

my car is affected, and my dealer says its a recall...they are just pissed because its listed as an hour job, but the tech says it takes longer than that.

05-08-2018, 01:29 PM	#30
DevilsReject97 Nightmare Drives: Your mom crazy in bed Join Date: Mar 2011 Location: Naptown Posts: 2,442	Stopped in to my dealer to inquire about this. It is VIN specific, so it does not apply to all cars. Call in and inquire about it with your VIN, they should be able to tell you over the phone. __________________

05-10-2018, 09:54 AM	#37
Chevyman2 Drives: 2018 zl1 Join Date: Dec 2012 Location: Caswell County, NC Posts: 599 View My Garage	Went to the dealer to get this done on zl1 the addition of wire management is under the belly pan and underhood passenger side. The wire management has clip attached to clip on bolt nearby. Last edited by Chevyman2; 05-13-2018 at 08:51 PM.

05-15-2018, 07:14 PM	#40
dwill8335 Drives: 2017 Camaro ZL1 Ice Metallic A10 Join Date: Feb 2017 Location: Ft McCoy, Florida Posts: 37	Recall It shows up in dealer system as a recall, will have mine fixed Saturday.

05-08-2018, 12:46 PM	#29
Gunkk Thank you Al Oppenheiser! Drives: Red Hot A10 ZL1 Convertible Join Date: Jun 2017 Location: Sarasota, FL Posts: 5,156 View My Garage	Anyone got pics ? I'd rather do this fix myself than take it to a dealer and suffer the consequences.

05-09-2018, 08:52 AM	#33
NITEMER Drives: 2017 Camaro ZL1 Join Date: Jan 2018 Location: Berwyn Posts: 37	They tell me it was a recall and not a TSB but its the dealer so take it for what its worth, if it causes stalls and no restarts it should be a recall and it is a safety issue. I have gotten random fault codes for traction control, rear diff etc, but no stalls yet.

05-09-2018, 06:54 PM	#34
Biscuit.fr Drives: Red hot ZL1 A10 2017 Join Date: Nov 2016 Location: MS Back to France (29) Posts: 804	Recall, TSB Who cares? Some of you did it, put the pictures and the process, Please We can share....

05-10-2018, 09:22 AM	#36
Biscuit.fr Drives: Red hot ZL1 A10 2017 Join Date: Nov 2016 Location: MS Back to France (29) Posts: 804	Ok It appears to be a TSB sorry.... Just come back from the dealer I have everything printed Looks easy to do it .... I will post it here as soon as I’m home and know how to post pictures....... Just need electrical protection + tape

05-10-2018, 11:33 AM	#38
Biscuit.fr Drives: Red hot ZL1 A10 2017 Join Date: Nov 2016 Location: MS Back to France (29) Posts: 804

05-13-2018, 09:19 PM	#39
Biscuit.fr Drives: Red hot ZL1 A10 2017 Join Date: Nov 2016 Location: MS Back to France (29) Posts: 804	Did it myself this morning. Took my time. Put the car on the ramp Remove all the under protections Including the center aluminium one, to have an easy access. Had to disconnect the 2 connections of the steering like the pictures in order to play comfortably with the cable. (Not the upper one). Added the 2 protections (about 5 cm each) and wrapped the total with electrical cloth tape. Reconnected and refixed all the under protections. Done Difficulty on a scale 1-10 I will say 6. My big fingers didn’t help to put the tape... Took me hard time to remove and refix the wire retainer on the A/C compressor. Total took me 2-3 hrs Didn’t want to screw anything Reviewed all other connections and added some tape to secure more....

05-16-2018, 09:15 AM	#42
soceur77 Drives: 17 NFG ZL1 17 GTR 22 RS6 Join Date: Apr 2017 Location: Upper Marlboro MD Posts: 625	my car is affected, and my dealer says its a recall...they are just pissed because its listed as an hour job, but the tech says it takes longer than that.

User Name		Remember Me?
Password