[Can'tHave2MuchHP]

Originally Posted by ZLwonLE

Can you be more specific on the rims? I am new to this and want to look at these. They are nice! Rim size etc...

They're the same size but slightly different spec than OEM..

Forgeline GTD1
19x11 Front Offset +18
19x12 Rear Offset +43
305/30/19 Front (Michelin 4S)
325/30/19 Rear (Michelin 4S)

*EDITED* to reflect new numbers from Todd.

[Todd_Cooperider]

Here are a few shots of the wheels...

[Todd_Cooperider]

Originally Posted by Can'tHave2MuchHP

They're the same size and spec as OEM...

Forgeline GTD1
19x11 Front Offset +11
19x12 Rear Offset +41
305/30/19 Front (Michelin 4S)
325/30/19 Rear (Michelin 4S)

[ZL1 1LE]

Originally Posted by Todd_Cooperider

Here are a few shots of the wheels...

Any thoughts to doing the opposite with the OEM for the street and the Forgeline for the track? That's how I'd do it.

[Todd_Cooperider]

Originally Posted by ZL1 1LE

Any thoughts to doing the opposite with the OEM for the street and the Forgeline for the track? That's how I'd do it.

No. We sell Forgeline (and HRE) wheels, so the street application for the Forgelines get max visibility. There will only be a handful of people who see them at the track!

[TMS]

Originally Posted by Can'tHave2MuchHP

They're the same size and spec as OEM...

Forgeline GTD1
19x11 Front Offset +11
19x12 Rear Offset +41
305/30/19 Front (Michelin 4S)
325/30/19 Rear (Michelin 4S)

Hmmm. I have been wanting a set of the GS1Rs (the GTD1s are very similar and they look really nice on your car Todd), but I would have to run a 6mm spacer in the front to match the factory track width and to retain the slight poke. I contacted Forgeline 3 weeks ago and they said that the smallest positive offset they can go on a 19x11 is +17mm with their forging. If Forgeline can now do a +11mm offset on the front that would be awesome.

Can anyone confirm that Forgeline really can do a smaller offset than +17mm on their monoblocks?

Great videos. Thanks so much for sharing.

[Todd_Cooperider]

Originally Posted by TMS

Hmmm. I have been wanting a set of the GS1Rs (the GTD1s are very similar and they look really nice on your car Todd), but I would have to run a 6mm spacer in the front to match the factory track width and to retain the slight poke. I contacted Forgeline 3 weeks ago and they said that the smallest positive offset they can go on a 19x11 is +17mm with their forging. If Forgeline can now do a +11mm offset on the front that would be awesome.

Can anyone confirm that Forgeline really can do a smaller offset than +17mm on their monoblocks?

Great videos. Thanks so much for sharing.

I just checked the build sheet, and these wheels are actually ET18 front, and ET43 back.

Thanks, and glad you're enjoying the videos.

[hawk02]

The part 3 video on paint correction is live.

[Todd_Cooperider]

Originally Posted by hawk02

The part 3 video on paint correction is live.

Thanks for sharing Hawk...that one probably deserves a thread all of its own.

[7WSM]

That paint correction is just on another level. Lots of people seem to know how to "paint correct" Esoteric just does it on another level. This is the Jedi Master level of paint correction.

[Todd_Cooperider]

Originally Posted by 7WSM

That paint correction is just on another level. Lots of people seem to know how to "paint correct" Esoteric just does it on another level. This is the Jedi Master level of paint correction.

Thank you kindly! Our ultimate goal is to simply educate people on the right way to do it, and have the information based off of relentless testing, and daily application. There's a massive difference between a "good" paint correction (or detail), and a "great" one.

Please be sure to subscribe to the channel, and share our educational material accordingly.

[indyz]

Wow, thanks for the vids

[full*throttle*therapy]

Will you share which pads and polishes were used specifically? ..as another ZL1 1LE in Red Hot owner ..it would be nice to use the same tools that were used to achieve that stunning result. (Now having the *talent* on the other hand is a whole 'nother issue)

[Todd_Cooperider]

Originally Posted by indyz

Wow, thanks for the vids

Thank you!

Originally Posted by full*throttle*therapy

Will you share which pads and polishes were used specifically? ..as another ZL1 1LE in Red Hot owner ..it would be nice to use the same tools that were used to achieve that stunning result. (Now having the *talent* on the other hand is a whole 'nother issue)

PM Sent!