|
|
#1 |
![]() Drives: 2018 Camaro V6 2LT RS M6 Join Date: Oct 2017
Location: Central Florida
Posts: 9
|
Manual transmission question
Is it OK to leave from a complete stop in second gear instead of first?
I was just was just wondering if damage to the transmission could result when doing it regularly. Thanks. |
|
|
|
|
|
#2 |
![]() ![]() ![]() ![]() ![]() Drives: 08 Tiburon GS, 2018 Camaro 2.0T Join Date: Sep 2017
Location: Québec
Posts: 1,669
|
It will wear down the clutch faster cause you will make it slip more.
Make a complete stop, and start from first gear. Less wear on the clutch, zero chance to get pulled cause you didn't do a full stop, Best for both. |
|
|
|
|
|
#3 |
![]() ![]() |
Should be fine. If its to avoid the stupid skip shift thing then just get the eliminator, they are only 15 bucks.
|
|
|
|
|
|
#4 |
|
@SS_1LE
Drives: 2017 SS 1LE Join Date: Mar 2017
Location: San Francisco, CA
Posts: 381
|
Start from 1st. Starting from second results in more clutch slip and will wear your clutch faster. It should be fine on occasion but I would avoid doing it regularly
__________________
17' Camaro SS 1LE | PDR | Summit White
Borla S-Type Axleback | Mishimoto Catch Can | LED Sidemarkers | ZL1addons DRGs | Michelin MPS4S |
|
|
|
|
|
#5 |
![]() |
If it helps I usually go from first to 3rd when im going easy it wont lug the engine like going into 4th gear.
|
|
|
|
|
|
#6 |
|
@SS_1LE
Drives: 2017 SS 1LE Join Date: Mar 2017
Location: San Francisco, CA
Posts: 381
|
I do the same if skip shift is activated. First -> third doesn't result in almost idle rpms like the 1st -> 4th skip shift does.
__________________
17' Camaro SS 1LE | PDR | Summit White
Borla S-Type Axleback | Mishimoto Catch Can | LED Sidemarkers | ZL1addons DRGs | Michelin MPS4S |
|
|
|
|
|
#7 |
![]() Drives: Sold! Join Date: Nov 2017
Location: SoCal
Posts: 105
|
No skip shift in the V6 or I4 models.
I use 2nd to start on steeper downhills, but I can’t imagine a lot of that in Florida. |
|
|
|
|
|
|
|
|
Post Reply
|
|
|