[Gen5&Beyond]

Originally Posted by laynlo15

I'll post my slip later, but I made my best pass of all time this morning at 10.03@138, also yesterday 10.07 and 10.08. Not bad for stock motor, stock weight Plus roll bar. Maybe soon I'll see some 9 second passes.

Congratulation on the new PR. I see 9's in your future for sure.

[hitmix300]

2016 Camaro SS A8
Tires used on the pass: M&H 325 40 18
Performance Mods (if any): Hellion twin @ 6.5psi
Category submitted for: Bolt On's & power adder
R/T........... 0.026
60'............. 1.77
330'........... 4.7125
660'........... 7.0734
660’ mph... 104.43
1000'..........
1320'.......... 10.805
1320’ mph…131.00
Name of the track: Ubly Dragway
Date of pass: April 21, 2018
Weather conditions: Include Density Altitude if known. (Optional not required)

[markblackwell]

Originally Posted by laynlo15

Thx Mark, gonna get that 9 second pass next weekend. Throwing to toilet at it including the seat.

do you have the swing out side bar and your RPM roll bar/cage. I ordered mine last week and I am worried its gonna rattle?

Get that 9 second run!

[ULTRAZLS1]

Originally Posted by Gen5&Beyond

#1. Post the details of your quarter-mile pass using this template: (cut and paste)
Tires used on the pass: M/T 305/45/17
Performance Mods (if any):1 7/8 lt's, e85, RotoFab CAI, PRAY ported IM/TB, PRAY Tune,
Category submitted for: Category #3
R/T............ .670
60'............. 1.608
330'...........
660'........... 7.209
660’ mph... 98.61
1000'..........
1320'.......... 11.240
1320’ mph… 116.51
Name of the track: Alabama International Raceway
Date of pass: April 20, 2018
Weather conditions: 47 degrees, DA -396

Did you let off or something ? I’ve never seen a car back half less than 22 mph. Your trap should have been 120+. That or the lane is reading mph incorrectly

[wlsmoku]

I will post my slip tonight, but ran a mediocre 11.31@124 with a 1.72 60ft. 2018 zl1 a10 stock with drag radials.

[laynlo15]

Mine is a swing out bar and no it doesn't rattle, good and tight.

[SSLandon]

Tires used on the pass: Stock Goodyear
Performance Mods (if any): None
Category submitted for: #1 Bone stock M6
R/T.......... .927
60'............. 2.258
330'........... .000
660'........... 8.655
660’ mph... 89.00
1000'.......... .000
1320'.......... 13.063
1320’ mph… 111.42
Name of the track: Portland International Speedway
Date of pass: Apr 21, 2018

First time taking her to the strip and was able to put down 2 passes, this was the best with traction control on.

[Merc]

Hopefully some time to update the lists this weekend!

[laynlo15]

I'll have mine posted so you can do it then. Man Camaro fest is coming up on us soon. Can't wait

[6spdhyperblue]

Originally Posted by Merc

Hopefully some time to update the lists this weekend!

Thanks

[Merc]

Come On Folks. I started to update the lists and if Members can't take the time to post the info as per Post # 1 of this thread, why should I take the time to try and figure it out. No more illedgable time slips, multiple time slips or time slips spread across the hood that I can't easily read. One clear picture of the WHOLE time slip that I can read or I will just ignore it and move to the next post!

This is the FINAL WARNING! Do it Right or don't bother!

Off to work on Pumpkin for the day.

[MarkMc26]

Originally Posted by Merc

Come On Folks. I started to update the lists and if Members can't take the time to post the info as per Post # 1 of this thread, why should I take the time to try and figure it out. No more illedgable time slips, multiple time slips or time slips spread across the hood that I can't easily read. One clear picture of the WHOLE time slip that I can read or I will just ignore it and move to the next post!

This is the FINAL WARNING! Do it Right or don't bother!

Off to work on Pumpkin for the day.

Merc, I hear ya. In addition to my day job, I have managed a local alumni group for my university (so, college-educated adults...by definition, anyway) and I currently manage a time trial group for a regional track-day club (participants range from megadollar businessmen to Average Joes like me). I have learned that only about 1/2 of the people in any group actually bother to read or comprehend anything, no matter how simple or brief the instructions are. If I was dealing with a group of mouth breathers, then I would say that they are just dumb, and the behavior is understandable. But, these are people who are successful on many levels; so, its not a matter of dumb or lazy. In this case, I'm probably dumb for "doing it wrong."

Well, I'm violating the rule against extra conversation now. Time to go. Rest assured that your efforts are appreciated!

Mark

[Blown355]

Originally Posted by Merc

Come On Folks. I started to update the lists and if Members can't take the time to post the info as per Post # 1 of this thread, why should I take the time to try and figure it out. No more illedgable time slips, multiple time slips or time slips spread across the hood that I can't easily read. One clear picture of the WHOLE time slip that I can read or I will just ignore it and move to the next post!

This is the FINAL WARNING! Do it Right or don't bother!

Off to work on Pumpkin for the day.

If you're talking about my timeslip (post 1424) the track printer was out of ink. I spent hours getting it to that point. I can't do anything about the quality of slip I get from the track. I made it as clear as I could.

Thanks.

[Blown355]

Originally Posted by Blown355

If you're talking about my timeslip (post 1424) the track printer was out of ink. I spent hours getting it to that point. I can't do anything about the quality of slip I get from the track. I made it as clear as I could.

Thanks.

Catagory:7
Stock 2017 ZL1 A10
60'.............2.07
330'...........5.18
660'...........7.67
660’ mph....99.54
1000'..........9.79
1320'..........11.58
1320’ mph….128.02

San Antonio raceway 4/7/18

Had my son work on it. Much easier to read now.