Raise Rev Limit?

Joel2702zzz · 03-20-2018, 05:13 PM

Anyone have info on how to raise rev limit for an 2016 SS M6 with hptuners.

JRS · 03-20-2018, 10:15 PM

If your looking to raise the rev limit with hp tuners it is in the engine section, then go to the fuel section and last go to the cutoff,dfco section. The rev limit is set at 6700 and resume is 6620.
I don't know if you want to go a whole lot higher due to valve float which with a roller came isn't good or a valve could hit a piston. You could put heavier spring in or maybe titanium keepers to lighten the valve train up to get 7000-7500 but with the factory cam you aren't going to gain anything.
Just my thoughts.

JFM-jr · 03-20-2018, 10:29 PM

Theres also Cutoff RPM vs gear wich is the rev limiter that is gear specific and those are set to 6600

Joel2702zzz · 03-21-2018, 09:42 PM

We have already changed both of those values and the car still cuts at 6600.

SaphfireSS · 03-22-2018, 01:31 PM

Why in hell would you want to go higher? You start loosing power before that.

JFM-jr · 03-22-2018, 06:00 PM

I'd have to look again but there are more than just those named above. There's an oil temp vs RPM table too I'd have to look again tho

JRS · 03-22-2018, 08:41 PM

I was looking and there is another limit in the airflow/variable camshaft/ intake camshaft/ enable conditions/hi rpm enable, disable. I don't know if this has anything to do with it but it might be worth a try.

03-20-2018, 05:13 PM	#1
Joel2702zzz Drives: My Dad's car is a '16 1SS 6MT Join Date: Jul 2016 Location: Menifee CA Posts: 76	Raise Rev Limit? Anyone have info on how to raise rev limit for an 2016 SS M6 with hptuners.

03-20-2018, 10:29 PM	#3
JFM-jr Drives: 2016 Camaro 2SS Join Date: Mar 2016 Location: Suffolk Long Island Posts: 954	Theres also Cutoff RPM vs gear wich is the rev limiter that is gear specific and those are set to 6600 __________________ 2016 Hyper Blue 2SS A8,NPP,Moonroof Pray ported factory intake manifold Ported TB Rotofab ARH 1 7/8 longtubes hi flow cats AFM deleted E85 11.0@124.9 11.65@118.8 pump gas,stock tune/exhaust New combo: Pray Performance Heads/cam MSD intake manifold and Circle D 3C 554/491 on E85 all work & tuning done by Pray

03-22-2018, 06:00 PM	#6
JFM-jr Drives: 2016 Camaro 2SS Join Date: Mar 2016 Location: Suffolk Long Island Posts: 954	I'd have to look again but there are more than just those named above. There's an oil temp vs RPM table too I'd have to look again tho __________________ 2016 Hyper Blue 2SS A8,NPP,Moonroof Pray ported factory intake manifold Ported TB Rotofab ARH 1 7/8 longtubes hi flow cats AFM deleted E85 11.0@124.9 11.65@118.8 pump gas,stock tune/exhaust New combo: Pray Performance Heads/cam MSD intake manifold and Circle D 3C 554/491 on E85 all work & tuning done by Pray

03-20-2018, 10:15 PM	#2
JRS Drives: 16 camaro M6/ 18 ZL1 camaro A10 Join Date: Nov 2015 Location: MD/PA LINE Posts: 202	If your looking to raise the rev limit with hp tuners it is in the engine section, then go to the fuel section and last go to the cutoff,dfco section. The rev limit is set at 6700 and resume is 6620. I don't know if you want to go a whole lot higher due to valve float which with a roller came isn't good or a valve could hit a piston. You could put heavier spring in or maybe titanium keepers to lighten the valve train up to get 7000-7500 but with the factory cam you aren't going to gain anything. Just my thoughts.

03-21-2018, 09:42 PM	#4
Joel2702zzz Drives: My Dad's car is a '16 1SS 6MT Join Date: Jul 2016 Location: Menifee CA Posts: 76	We have already changed both of those values and the car still cuts at 6600.

03-22-2018, 01:31 PM	#5
SaphfireSS Drives: 2017 Camaro 1LE SS Join Date: Oct 2016 Location: In my driveway or on the track. Lol Posts: 257	Why in hell would you want to go higher? You start loosing power before that.

03-22-2018, 08:41 PM	#7
JRS Drives: 16 camaro M6/ 18 ZL1 camaro A10 Join Date: Nov 2015 Location: MD/PA LINE Posts: 202	I was looking and there is another limit in the airflow/variable camshaft/ intake camshaft/ enable conditions/hi rpm enable, disable. I don't know if this has anything to do with it but it might be worth a try.

User Name		Remember Me?
Password