03-12-2018, 10:32 PM | #1 |
Drives: 2016 1ss m6 Camaro Join Date: Jul 2016
Location: roxboro,nc
Posts: 197
|
gforce axle install
anyone have any advice for the install of gforce axles? wasn't sure if they come with an install guide or if anyone had some advice before I tackle it this week thanks.
__________________
2016 camaro 1ss,m6-npp,tsp longtubes,no cats,e85,tuned by rpm motorsports(451hp/467tq),
17"race stars drag pack,bmr upper and lower trailing arms,bmr upper control arms,bmr front cradle brace,gforce outlaw axles/driveshaft,lnf 2step. Best 1/4 mile of 11.2@122mph |
03-13-2018, 11:22 AM | #2 |
Drives: 2016 1SS 6speed Join Date: Mar 2016
Location: IL
Posts: 527
|
Use a heck of a pry bar against the diff housing. Aside from that, remove all the trailing links that aren’t adjustable for the alignment. It’ll take quite a bit of force to knock them out. Mine did anyway. Aside from that, it’s pretty straight forward. Probably take half a day on the garage floor with jack stands.
__________________
2016 1SS M6 P1SC Stg II 592rwhp/548rwtq (for now)
GForce Outlaw axles & driveshaft, TSP 2” LT’s, turndowns, RTS S71 drag pack with radials. |
03-17-2018, 11:06 AM | #3 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,325
|
mark the location of any adjuster bolts and most suspension bolts on the rear are torque to yield aka POS, aka disaster waiting to happen, aka somebody should get fired.
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
|
|
Post Reply
|
|
|