What did you do to your 6th Gen Camaro today?! - Page 338

diirk · 03-14-2018, 10:49 AM

Quote:

Originally Posted by diirk

Starting the install on my air suspension.

Everything designed and/or supplied by Open Road Tuning.
Inserts are custom valved. Rear bag mounts from UAS.
Fronts are custom with BC camber plates.
AirLift 3P management.
2.5 Gal tank
Viair 444C compressor

Have everything roughed in for testing.
Electrical is basically just mounted on a board in the truck for the time being. Will clean that up once everything else is checked out.

Airlines are routed from the trunk along the underside of the car on the left. There's a panel that runs most of the length and I have the lines in there. Comes up into the engine bay right behind the wheel well, and one line crosses along at the cowling.

Still getting the minimum ride height on the coil overs set, but I have it pretty close. But that'll probably change once I put the MRR wheels back on. I did verify that I have clearance in the front between the MRR wheel and the bag.

Right now it's sitting in the garage running a leak test.

ssmike · 03-17-2018, 05:02 PM

Pulled her out of the garage for a warm up and to install my personalized plates!

speedzalot · 03-17-2018, 05:19 PM

Quote:

Originally Posted by diirk

Have everything roughed in for testing.
Electrical is basically just mounted on a board in the truck for the time being. Will clean that up once everything else is checked out.

Airlines are routed from the trunk along the underside of the car on the left. There's a panel that runs most of the length and I have the lines in there. Comes up into the engine bay right behind the wheel well, and one line crosses along at the cowling.

Still getting the minimum ride height on the coil overs set, but I have it pretty close. But that'll probably change once I put the MRR wheels back on. I did verify that I have clearance in the front between the MRR wheel and the bag.

Right now it's sitting in the garage running a leak test.

That looks great slammed

speedzalot · 03-17-2018, 05:22 PM

Got my new vis terminator hood on

sdavis2702 · 03-17-2018, 07:30 PM

Black bowtie install.

arpad_m · 03-17-2018, 07:42 PM

Quote:

Originally Posted by sdavis2702

Black bowtie install.

Looks awesome

I think you'd love the dark tails and 3rd brake light with this combo.

DC5 · 03-17-2018, 10:24 PM

I removed the snow around it . . .

soloknight6 · 03-17-2018, 10:37 PM

-Diirk, Your car is F*&@ing BAD A%&!!! Looks fantastic slammed man! Im tempted to do this to my car, but I have concerns about reliability, as my car is my daily.

-Sdavis2702, I think I saw your car today down by sports arena! That silver and black combo is rad.

diirk · 03-20-2018, 07:18 AM

Quote:

Originally Posted by soloknight6

-Diirk, Your car is F*&@ing BAD A%&!!! Looks fantastic slammed man! Im tempted to do this to my car, but I have concerns about reliability, as my car is my daily.

Thanks. I'm sure it'll look better once I put the MRR wheels back on it.
As for reliability, I agree. It's also my daily but so was my last air ride car. Overall, it's a reliable setup as long as it's installed and setup properly.

gpskinzhut · 03-20-2018, 07:23 AM

First wash of the season and parked off in the grass so I could clean out the garage. Had to take a couple pics.

Soleil · 03-21-2018, 03:33 PM

Start installing my pedal cover.

rocknss · 03-21-2018, 07:30 PM

Installed new pedals and a Vitesse Motorsports throttle controller.

rocknss · 03-21-2018, 08:09 PM

Installed JW Motorsports LED side marker lights.

Driium · 03-21-2018, 08:29 PM

Quote:

Originally Posted by mikem2104

picked it up

new quickjack put to the test

Every once in a while I see something online that I instantly react with "I NEED THIS" This is one of those things. Ordered. Lol

03-17-2018, 05:02 PM	#4720
ssmike BL1ZZRD Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009 Location: Buffalo, NY Posts: 7,841	Pulled her out of the garage for a warm up and to install my personalized plates! Attached Images

03-17-2018, 05:22 PM	#4722
speedzalot Drives: 2011 Camaro SS Join Date: Jan 2016 Location: New Mexico Posts: 97	Got my new vis terminator hood on Attached Images __________________

03-17-2018, 07:30 PM	#4723
sdavis2702 Drives: 2017 Camaro 2SS Join Date: Jul 2007 Location: San Diego, CA Posts: 154	Black bowtie install. Attached Images

03-17-2018, 10:24 PM	#4725
DC5 Drives: 2019 Chevrolet Camaro SS 1LE Join Date: Nov 2016 Location: Arizona Posts: 596	I removed the snow around it . . . Attached Images Last edited by DC5; 03-17-2018 at 11:26 PM.

03-17-2018, 10:37 PM	#4726
soloknight6 SoCal HT5! SD Drives: 2016 red hot 2ss M6 Join Date: Nov 2011 Location: San Diego CA, Posts: 1,929	-Diirk, Your car is F*&@ing BAD A%&!!! Looks fantastic slammed man! Im tempted to do this to my car, but I have concerns about reliability, as my car is my daily. -Sdavis2702, I think I saw your car today down by sports arena! That silver and black combo is rad. __________________ http://www.camaro5.com/forums/showth...37#post5437037 By my deeds, I honor him. V8!!!

03-20-2018, 07:23 AM	#4728
gpskinzhut Drives: 2020 Corvette Stingray Z51 Join Date: Aug 2011 Location: Knoxville, TN Posts: 1,982 View My Garage	First wash of the season and parked off in the grass so I could clean out the garage. Had to take a couple pics. Attached Images __________________ 2020 Corvette 2LT Z51 2017 ZL1 A10: (SOLD) \|\| 2017 2SS M6: (SOLD) \|\| 2014 2LT Convertible: (SOLD) \|\| 2010 2LT M6 Supercharged:(SOLD) \|\| 1987 IROC-Z 5.0 M5: (SOLD)

03-21-2018, 03:33 PM	#4729
Soleil Drives: Camaro 50th anniversary edition Join Date: May 2017 Location: Europe Posts: 2,203 View My Garage	Start installing my pedal cover. Attached Images __________________ Soleil _____________________________________________ A car is fast enough, if you fear to unlock it in the morning." (Walter Roehrl)

03-21-2018, 07:30 PM	#4730
rocknss Drives: 2017 50th Anniversary Camaro SS Join Date: Jun 2017 Location: Milwaukee Posts: 124	Installed new pedals and a Vitesse Motorsports throttle controller. Attached Images __________________ 2017 50th Anniversary Camaro 2SS 2016 Chevy Malibu LT (wife's car) 2004 Chevy Impala (winter car) 2001 Chevy Camaro SS (sold) 1969 Chevy Suburban (restoration project)

03-21-2018, 08:09 PM	#4731
rocknss Drives: 2017 50th Anniversary Camaro SS Join Date: Jun 2017 Location: Milwaukee Posts: 124	Installed JW Motorsports LED side marker lights. Attached Images __________________ 2017 50th Anniversary Camaro 2SS 2016 Chevy Malibu LT (wife's car) 2004 Chevy Impala (winter car) 2001 Chevy Camaro SS (sold) 1969 Chevy Suburban (restoration project)

User Name		Remember Me?
Password