Center Bore size for 2SS?

JBinSD · 03-07-2018, 06:46 PM

Discount tire says 66.9 Center Bore does not fit the 2SS (don't ask me why I know

) Is this the factory size Center Bore? They say it calls for 67.1. . . Anyone know for sure?

Answered my own Q:
Chevrolet Camaro 2016 6.2
– Generation: VI [2016 .. 2019]
– Power: 455 hp | 339.3 kW | 461 PS
– Engine: V8, Petrol
– Center Bore: 67.1 mm
– Wheel Fasteners: Lug nuts
– Thread Size: M14 x 1.5
– Trim Production: [2016 .. 2017]
Tire
Rim
PCD
Vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).
245/40ZR20 95Y 8.5Jx20 ET25 5x120
2.4

DarrenMRRWheels · 03-07-2018, 07:52 PM

I've seen some postings have varied depending on who is writing....
We manufacture all our MRR Wheels with the 66.9 cb. Obviously there is a +/- but you're talking about 3 sheets of paper.

Clean off the hub before mounting any wheel up on the car. Rust and debris accumulate,

D

JBinSD · 03-07-2018, 08:12 PM

Thanks D, Discount Tire pulled the wheel, changed the tire to the new rim, and tried for about 45 mins to get it on. I know they're not rocket scientists there, but they pulled up the spec and refused to mount it, saying its the wrong size. had to swap the tire/rim back again. Grr. I'll pull it by hand tomorrow night and try again, I've never heard anyone else have this problem, so maybe its just me.

PK Auto Design · 03-08-2018, 01:13 PM

The 5th gen and 6th gen are both 66.98 mm CB

Most of the popular Camaro wheels are milled at 67.1 mm sir.

JBinSD · 03-11-2018, 10:35 PM

Steel wool and soft rag on a 2x4 and got the rim over the hub this weekend, still not sure why they don't make it with the factory spec, but happy its back on again :-)

03-07-2018, 06:46 PM	#1
JBinSD Drives: '23 LT Vert M6'16 Hyper 2SS Vert MT Join Date: Sep 2016 Location: Carlsbad, San Diego, CA Posts: 604	Center Bore size for 2SS? Discount tire says 66.9 Center Bore does not fit the 2SS (don't ask me why I know ) Is this the factory size Center Bore? They say it calls for 67.1. . . Anyone know for sure? Answered my own Q: Chevrolet Camaro 2016 6.2 – Generation: VI [2016 .. 2019] – Power: 455 hp \| 339.3 kW \| 461 PS – Engine: V8, Petrol – Center Bore: 67.1 mm – Wheel Fasteners: Lug nuts – Thread Size: M14 x 1.5 – Trim Production: [2016 .. 2017] Tire Rim PCD Vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch). 245/40ZR20 95Y 8.5Jx20 ET25 5x120 2.4 Last edited by JBinSD; 03-07-2018 at 07:01 PM.

03-07-2018, 07:52 PM	#2
DarrenMRRWheels Drives: 2016 Camaro SS Join Date: Aug 2016 Location: Commerce Posts: 34	I've seen some postings have varied depending on who is writing.... We manufacture all our MRR Wheels with the 66.9 cb. Obviously there is a +/- but you're talking about 3 sheets of paper. Clean off the hub before mounting any wheel up on the car. Rust and debris accumulate, D

03-07-2018, 08:12 PM	#3
JBinSD Drives: '23 LT Vert M6'16 Hyper 2SS Vert MT Join Date: Sep 2016 Location: Carlsbad, San Diego, CA Posts: 604	Thanks D, Discount Tire pulled the wheel, changed the tire to the new rim, and tried for about 45 mins to get it on. I know they're not rocket scientists there, but they pulled up the spec and refused to mount it, saying its the wrong size. had to swap the tire/rim back again. Grr. I'll pull it by hand tomorrow night and try again, I've never heard anyone else have this problem, so maybe its just me.

03-08-2018, 01:13 PM	#4
PK Auto Design Drives: 2017 Chevrolet SS 1LE Join Date: Oct 2016 Location: Los Angeles, California Posts: 9,269	The 5th gen and 6th gen are both 66.98 mm CB Most of the popular Camaro wheels are milled at 67.1 mm sir.

03-11-2018, 10:35 PM	#5
JBinSD Drives: '23 LT Vert M6'16 Hyper 2SS Vert MT Join Date: Sep 2016 Location: Carlsbad, San Diego, CA Posts: 604	Steel wool and soft rag on a 2x4 and got the rim over the hub this weekend, still not sure why they don't make it with the factory spec, but happy its back on again :-)

User Name		Remember Me?
Password