WTB: Stainless Works factory connection pipe reducers

jimmypop13 · 02-11-2018, 12:47 AM

I have full stainless works exhaust on my car. Im thinking of removing the axleback and putting the stock muffler back on to quiet it down but I can't find the 3"-2.75" reducers that came with the headers/x-pipe to make it reduce down into the stock muffler. If anyone has a set they aren't using, please let me know. Thanks!

blazzin1 · 02-11-2018, 11:42 AM

I can’t help you with the adapters, but I would guess that SW probably could if you called them? Just wondering why your system is so loud? Are you catless? What about AFM? I know the headers themselves add some volume, but I didn’t think it would be too unbearable. Must be some other factors involved. I’ve heard the SW system was pretty “tame” compared to something like the Atak system. Let me know if you decide to sell that SW axle-back.

jimmypop13 · 02-12-2018, 08:15 PM

Quote:

Originally Posted by blazzin1

I can’t help you with the adapters, but I would guess that SW probably could if you called them? Just wondering why your system is so loud? Are you catless? What about AFM? I know the headers themselves add some volume, but I didn’t think it would be too unbearable. Must be some other factors involved. I’ve heard the SW system was pretty “tame” compared to something like the Atak system. Let me know if you decide to sell that SW axle-back.

I emailed them a week ago and never got a response. I've had problems emailing them before too. I may call. I have cats but I also have electric cutouts installed after the x-pipe that I had put on when I still had the stock npp muffler. I added the stainless works axleback later and I swear it's almost just as loud as the open cutouts. With the npp valves closed(and cutouts closed) it's around the same volume as valves open on stock npp muffler with headers. I wish it was just a little more refined sound or a little bit quieter I guess. I miss having that dead silent mode for long trips. Is the stock system 2.75"? I found some generic reducers that look pretty similar I may try if I can't get in touch with Stainless works out they want too much

blazzin1 · 02-12-2018, 09:06 PM

Yeah, any 3.0” to 2.75” exhaust reducer should work.

jimmypop13 · 02-13-2018, 02:26 AM

Quote:

Originally Posted by blazzin1

Yeah, any 3.0” to 2.75” exhaust reducer should work.

Thanks. I'll let ya know if I decided to sell the SW axleback

jimmypop13 · 02-19-2018, 04:43 PM

Bump

02-11-2018, 12:47 AM	#1
jimmypop13 Drives: 2016 camaro ss Join Date: Oct 2010 Location: Spring, TX Posts: 1,127	WTB: Stainless Works factory connection pipe reducers I have full stainless works exhaust on my car. Im thinking of removing the axleback and putting the stock muffler back on to quiet it down but I can't find the 3"-2.75" reducers that came with the headers/x-pipe to make it reduce down into the stock muffler. If anyone has a set they aren't using, please let me know. Thanks! __________________ 2016 camaro 2SS hyper blue/Kalahari, A8, MRC, NPP, sunroof, SW headers through axleback, Circle D 3600rpm TC, Pray ported IM/TB, E85 Sold: 2002 Z28, NBM, M6, 460rwhp, 2009 HHR SS RIP : 2002 WS6 Black, A4, 355rwhp Last edited by jimmypop13; 02-19-2018 at 04:43 PM.

02-19-2018, 04:43 PM	#6
jimmypop13 Drives: 2016 camaro ss Join Date: Oct 2010 Location: Spring, TX Posts: 1,127	Bump __________________ 2016 camaro 2SS hyper blue/Kalahari, A8, MRC, NPP, sunroof, SW headers through axleback, Circle D 3600rpm TC, Pray ported IM/TB, E85 Sold: 2002 Z28, NBM, M6, 460rwhp, 2009 HHR SS RIP : 2002 WS6 Black, A4, 355rwhp

02-11-2018, 11:42 AM	#2
blazzin1 Drives: 2010 2SS/RS R6P Join Date: Nov 2008 Location: St. Cloud, FL Posts: 4,845 View My Garage	I can’t help you with the adapters, but I would guess that SW probably could if you called them? Just wondering why your system is so loud? Are you catless? What about AFM? I know the headers themselves add some volume, but I didn’t think it would be too unbearable. Must be some other factors involved. I’ve heard the SW system was pretty “tame” compared to something like the Atak system. Let me know if you decide to sell that SW axle-back.

02-12-2018, 09:06 PM	#4
blazzin1 Drives: 2010 2SS/RS R6P Join Date: Nov 2008 Location: St. Cloud, FL Posts: 4,845 View My Garage	Yeah, any 3.0” to 2.75” exhaust reducer should work.

User Name		Remember Me?
Password