Wheels are on!

kttxz06 · 02-01-2018, 04:56 PM

Finally. Jeez. After 3 months of waiting. Anyhow, I'm pleased with the results, although I'm hoping these BMR springs settle down a bit more. Not too happy with the stance, but I just put the springs on late last night, so they say it should drop another 1/4 inch. Once it does that, it should look mucho fino!! But, love the wheels. The ride quality is still the same even with the springs. Car feels lighter honestly. I'm not sure of the weight savings, but I can tell there is. It might not be much, maybe 1 or 2 lbs a wheel, but I can def tell it feels a bit lighter.

Anyhow, once it settles Incurve is going to come out and do a video shoot.

Hope ya'll like. Just took a few quick pics while we had some sun out.

JB'sZL1 · 02-01-2018, 04:59 PM

Looks nice. I agree with the stance: the rear should be higher, or, preferably, the front lower.

xp3nd4bl3 · 02-01-2018, 05:00 PM

Good lord...

kttxz06 · 02-01-2018, 05:04 PM

Quote:

Originally Posted by JB'sZL1

Looks nice. I agree with the stance: the rear should be higher, or, preferably, the front lower.

I think both need to be lower. To me, the rear is too high. But, maybe I'm over stating it. Everyone at the tire shop had their tongues to the ground so. How is it supposed to sit? Higher in the rear a tick? Or even? Either way, it needs to settle another 1/4 inch or I'm going to have to go with another spring or coil over set up. It could be the street too as it's slanted down towards the left, so it's angling the car up a bit on the right side. If the street was flat, stance might look a tick better.

EMAX08 · 02-01-2018, 05:16 PM

They look amazing with the NGM! Congrats!

kttxz06 · 02-01-2018, 05:21 PM

Quote:

Originally Posted by EMAX08

They look amazing with the NGM! Congrats!

Thanks. Yea, they are def dif than the stockers.

kttxz06 · 02-01-2018, 05:40 PM

Pic in my garage. What do ya'll think? Needs to settle? Other than that, I think they sit fine.

TDS · 02-01-2018, 06:00 PM

Very nice!!

likerage · 02-01-2018, 06:15 PM

That looks gorgeous. My wife would have 2 of them curbed by the end of the week.

kttxz06 · 02-01-2018, 06:29 PM

Quote:

Originally Posted by likerage

That looks gorgeous. My wife would have 2 of them curbed by the end of the week.

haha i know right. Mine too. Good thing she's in Hawaii and won't be near my car so.

Mcmillion · 02-01-2018, 07:35 PM

They look great!

MR 45TH · 02-01-2018, 07:51 PM

Love the wheels!

Can'tHave2MuchHP · 02-01-2018, 08:47 PM

Looks good man. Get us some more pics! 3/4 shot, get down low, etc! Lol.

kttxz06 · 02-01-2018, 09:26 PM

Quote:

Originally Posted by Can'tHave2MuchHP

Looks good man. Get us some more pics! 3/4 shot, get down low, etc! Lol.

I'm gonna wait for the car to settle a bit then just post up the video when Incurve comes out and does their shoot.

02-01-2018, 04:56 PM	#1
kttxz06 Drives: '18 Zl1. '18 GT350. Join Date: Dec 2016 Location: Katy Posts: 2,104	Wheels are on! Finally. Jeez. After 3 months of waiting. Anyhow, I'm pleased with the results, although I'm hoping these BMR springs settle down a bit more. Not too happy with the stance, but I just put the springs on late last night, so they say it should drop another 1/4 inch. Once it does that, it should look mucho fino!! But, love the wheels. The ride quality is still the same even with the springs. Car feels lighter honestly. I'm not sure of the weight savings, but I can tell there is. It might not be much, maybe 1 or 2 lbs a wheel, but I can def tell it feels a bit lighter. Anyhow, once it settles Incurve is going to come out and do a video shoot. Hope ya'll like. Just took a few quick pics while we had some sun out. __________________ There's only 2 people I trust. 1 of them is me, the other's not you. 2018 Zl1. 1199 RWHP/931 TQ.

02-01-2018, 05:40 PM	#7
kttxz06 Drives: '18 Zl1. '18 GT350. Join Date: Dec 2016 Location: Katy Posts: 2,104	Pic in my garage. What do ya'll think? Needs to settle? Other than that, I think they sit fine. __________________ There's only 2 people I trust. 1 of them is me, the other's not you. 2018 Zl1. 1199 RWHP/931 TQ.

02-01-2018, 06:00 PM	#8
TDS Drives: 2019 Jeep Rubicon Sold:2017 ZL1 A10 Join Date: Feb 2017 Location: Scappoose, OR Posts: 560	Very nice!! __________________ Travis SOLD ZL1 Summit White, A10, Black Strip, PDR, ZL1 floor mats Ordered 2/11, 2000 2/14, 3000 2/20, 3100 2/24, 3300 3/7, 3400 3/8, 4300 3/16, 4B00 3/21 Bayed at train yard in Ohio, 4200 3/26 All Abroad for the West Coast, 4800 4/4 Deliverd to portland train yard, 5000 4/7 3:00AM Deliverd to Dealer, 6000 4/7 6:45PM Delivered to Customer

02-01-2018, 07:51 PM	#12
MR 45TH Drives: 2018 ZL1 Join Date: Oct 2011 Location: Huntingtown, MD Posts: 1,138	Love the wheels! __________________ 2018 ZL1…Many mods to come

02-01-2018, 04:59 PM	#2
JB'sZL1 Drives: 2013 ZL1 and 2019 Ram Laramie Join Date: May 2017 Location: Milwaukee Posts: 1,259	Looks nice. I agree with the stance: the rear should be higher, or, preferably, the front lower.

02-01-2018, 05:00 PM	#3
xp3nd4bl3 Drives: 2017 HBM ZL1 M6 Join Date: Jul 2017 Location: Orange County, CA Posts: 40	Good lord...

02-01-2018, 05:16 PM	#5
EMAX08 Drives: 2018 ZL1——2010 2 RS/SS Join Date: Jul 2017 Location: Colorado Posts: 50	They look amazing with the NGM! Congrats!

02-01-2018, 06:15 PM	#9
likerage Drives: 2018 Camaro ZL1 Join Date: Dec 2017 Location: Denver Posts: 75	That looks gorgeous. My wife would have 2 of them curbed by the end of the week.

02-01-2018, 07:35 PM	#11
Mcmillion Drives: 2018 ZL1 1998 SS 1992 Typhoon Join Date: Nov 2015 Location: RR Posts: 262	They look great!

02-01-2018, 08:47 PM	#13
Can'tHave2MuchHP Drives: Fast Join Date: Mar 2015 Location: Michigan Posts: 3,696	Looks good man. Get us some more pics! 3/4 shot, get down low, etc! Lol.

User Name		Remember Me?
Password