|
|
#1 |
![]() |
17x10 tire drag set up.
What is the tallest tire you guys have been able to fit on a 17x10 wheel. I just ordered my forgestar 17in drag wheels and haven't decided on a tire yet... curious just how big I can go with stock suspension???
Thanks in advance. Sent from my iPhone using Tapatalk |
|
|
|
|
|
#2 |
|
SABIO
Drives: 2016 CAMARO 1SS Join Date: Jul 2015
Location: Bradford, ON
Posts: 5,013
|
From my reading. Going tall is the wrong way to go.
You want to keep it around or under 27". 275/45/17 or 295/40/17
__________________
|
|
|
|
|
|
#3 |
![]() Drives: 2017 1SS camaro ,2SS a 68 + 08 C6 Join Date: Dec 2017
Location: West palm beach
Posts: 495
|
|
|
|
|
|
|
#4 | |
![]() ![]() ![]() ![]() ![]() Drives: 17 SS a8 Join Date: Feb 2010
Location: omaha
Posts: 1,678
|
Quote:
I would go with a 305/45/17 but a smaller tire would be quicker up to the point it no longer hooks.
__________________
dropped a valve in the 6.2. now running a drop in rods and piston 5.3
best et 5.83@121 with the 5.3 http://www.camaro6.com/forums/showthread.php?t=465472 |
|
|
|
|
|
|
#5 | |
![]() |
17x10 tire drag set up.
Quote:
I will be using a power adder, plan on being 7-800hp. Stock suspension for the time being. 305/45 is what I had planned on. Just wanted some extra input on the subject before diving in. Sent from my iPhone using Tapatalk |
|
|
|
|
|
|
#6 |
|
SABIO
Drives: 2016 CAMARO 1SS Join Date: Jul 2015
Location: Bradford, ON
Posts: 5,013
|
Well... since you will have 700+hp....
![]() I would agree with taller.
__________________
|
|
|
|
|
|
#7 |
![]() |
305/45/17 Mickeys all day long
|
|
|
|
|
|
#8 |
![]() Drives: 2018 Red hot A10 ZL1 Join Date: Apr 2017
Location: Québec
Posts: 74
|
I'm wondering why go 17x10 and not 17x9.5 like I found was recommended for our cars?
|
|
|
|
|
|
#9 | |
![]() |
Quote:
I not sure of your source... Forgestar and my local tire connect both recommended 10inch over 9.5. You're limited to a 295 tire width on a 9.5. Anything wider will start to bubble the sidewall. Sent from my iPhone using Tapatalk |
|
|
|
|
|
|
#10 |
![]() Drives: 2017 1SS camaro ,2SS a 68 + 08 C6 Join Date: Dec 2017
Location: West palm beach
Posts: 495
|
I agree
Yep you'll need some side wall , and the tire is 27.9 inches in height so not really losing any gear there either . Probably the best combo you can bolt on there Especially for a power adder . And def go with 10 inch rim . Just check the proper back spacing and caliper clearance also. |
|
|
|
|
|
#11 | |
![]() ![]() |
Quote:
I run Mickey Thompson ET Street S/S in a 304/45R17 Andy it has been better than any Nitto or Hoosier tire I have tried. Don’t waste your time and money on anything else, honestly! I’ve done the testing. Unless you go full slick this is as good as it gets! |
|
|
|
|
|
|
#12 | |
![]() ![]() ![]() ![]() ![]() Drives: 17 SS a8 Join Date: Feb 2010
Location: omaha
Posts: 1,678
|
Quote:
__________________
dropped a valve in the 6.2. now running a drop in rods and piston 5.3
best et 5.83@121 with the 5.3 http://www.camaro6.com/forums/showthread.php?t=465472 |
|
|
|
|
|
|
#13 |
![]() ![]() |
|
|
|
|
|
|
#14 |
![]() Drives: 2019 zl1 Join Date: Jul 2016
Location: nokesville va
Posts: 67
|
Any input on what to run up front? I'm going with the race star 17x9.5 with the Mickey Thompson 305/45r17 what size would you recommend for the fronts?
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|