01-02-2018, 06:56 AM | #15 |
I bought the brake package option J55 calipers which are for the SS.
caliper part numbers are 84089045 & 84089044 (right front & left front) Am leaning towards the SS ROTORS but would love a definitive answer on the differences Surely someone has done this swap before? Last edited by outobie; 01-02-2018 at 08:07 AM. |
|
01-02-2018, 08:53 PM | #16 |
Get the rotors that match the calipers, SS calipers - SS rotors. That way you know they are made for each other, as long as the calipers are for gen 6, everything on the car will match up, but the hoses.
Did those calipers come with mounting bolts? |
|
01-02-2018, 09:41 PM | #17 |
Big Samoan ina little car
Drives: 2016 camaro Join Date: May 2014
Location: Tofiga Island
Posts: 1,872
|
When i did the swap to the front ss calipers and rotors. The bolts should be the same.
The ss comes with 13.6 inch rotors. Didnt come with the slots as the upgrade kit does. As stated, the only difference between ss and lt rotors are 1 inch in diameter. If youre going to 4 piston calipers from the ss, use the ss rotors. Dont over complicate it.
__________________
Don't sit around and watch everyone else live YOUR dreams...DO SUMPT'N
When I see posts asking "whats the best intake, exhaust, etc" .... the answer to that is like a grandfather telling his grandkids "if you put salt on a birds tail, it'll let you catch it" #ThinkAboutIt "Winning Tip: Don't take my (or anyone else's) word for it. GO TEST IT!" - Dennis Grant |
01-02-2018, 09:59 PM | #18 | |
Quote:
|
||
01-03-2018, 08:51 PM | #19 | |
Quote:
Any chance you have a part number for the bolts? |
||
01-03-2018, 09:33 PM | #20 | |
Quote:
The Black one from the LT stock was a 21mm head The Silver one from the SS Calipers is 18mm head and longer. Think the SS is longer, because the caliper is Aluminum with longer threads slot, where the Stock LT caliper mounting bracket is metal. Last edited by HyperBlue16; 01-03-2018 at 09:45 PM. |
||
07-21-2018, 03:21 AM | #21 |
USN VET
Drives: 2016 SS sedan, 2018 ZL1 1LE Join Date: Jun 2017
Location: Compton CA
Posts: 109
|
I'm looking for help on swapping my ZL1 brakes to the SS 4 piston brakes, I'm trying to fit 18x8 or 17x5 Welds. So far I've found these GM part #23245470. I'm wondering if they'll match up on the ZL1. Any help is appreciated.
__________________
HUZL1N_1LE
|
|
|
Post Reply
|
|
|