12-31-2017, 11:26 AM | #1 |
Drives: 18 Camaro ZL1 1LE (WILSON) Join Date: Jul 2009
Location: N.C.
Posts: 1,340
|
ZL1 1LE Road coarse setup
So when I adjust my front camber to the track setting should I get an alignment as well? If so what are the alignment settings to use?
__________________
|
12-31-2017, 11:40 AM | #2 |
HTCC Member
Drives: 2018 ZL1 1LE HBM Join Date: Oct 2014
Location: Houston TX
Posts: 326
|
I had mine checked and adjusted in the track camber setting. It was at -3.1 left -2.9 right and it adjusted to -2.7 front and -2.0 rear. I would definitely have it checked while on the track camber, not sure if others were off like mine camber was.
__________________
Last edited by djoker08; 12-31-2017 at 11:51 AM. |
12-31-2017, 11:45 AM | #3 |
Drives: ZL1 1LE Join Date: Oct 2016
Location: California
Posts: 1,297
|
I would definitely check both camber and toe before you hit the track.
__________________
|
12-31-2017, 11:47 AM | #4 |
Drives: 18 Camaro ZL1 1LE (WILSON) Join Date: Jul 2009
Location: N.C.
Posts: 1,340
|
what should the toe be set at?
__________________
|
|
|
Post Reply
|
|
|