[Bluecyclone]

Awesome family fun, enjoy.

[2thousand2]

Looks great! See you at PDX and AutoX events next year!

[4mulafastech]

Originally Posted by BMP-1LE

Great thread ! Can you post some more pictures of the garage build. Looks like we have the same cabinets - NewAge Pro . I love them , super solid

Thanks! I didn't take many pics of the garage build, but will get some after shots. You are correct on the cabinets. Great quality for the price.

[4mulafastech]

Originally Posted by PackersFan26

Nice boat!!

Thanks! It is a Formula Fastech 292 and we have had it since 2006. Boating is a big passion of ours as well.

[4mulafastech]

Originally Posted by Bluecyclone

Awesome family fun, enjoy.

Thank you and yes it is!

[4mulafastech]

Originally Posted by 2thousand2

Looks great! See you at PDX and AutoX events next year!

Thanks! I will keep an eye out for your 1LE.

[4mulafastech]

Originally Posted by Exgermanowner

could you or do you have a side shot where your 90 degrees? I'd like to get a better feel for those rockers.

Thanks

Exgermanowner - Here are several more pics I just took with some side shots.

All - I just wasn't completely happy with the paint as there were some swirls, very light scratches and halos over some areas of the paint. You could see where the factory made attempts to buff out imperfections, but it just wasn't very good.

Soooo... after some 25-30 hours of correcting and polishing with my Flex DA, here is the finished product. I pulled it out in the sun for some final inspecting and I'm really happy with the results! Not a flaw to be found. It is like 38F here, so quickly back in the garage to crack open a few beers and apply a nice coat of wax! The wife helping of course.

Also got the ZL1 addons front rock guards installed. I think they look good with the ACS side skirts and should offer some protection.

PS: The Camaro was on a lift for two days and I just put it down to pull out and take some pics. The springs have not settled and the body is sitting higher. This explains the additional gap between the tires and fender. It takes a while to settle to the normal height.

[Soleil]

Originally Posted by 4mulafastech

Exgermanowner - Here are several more pics I just took with some side shots.

All - I just wasn't completely happy with the paint as there were some swirls, very light scratches and halos over some areas of the paint. You could see where the factory made attempts to buff out imperfections, but it just wasn't very good.

Soooo... after some 25-30 hours of correcting and polishing with my Flex DA, here is the finished product. I pulled it out in the sun for some final inspecting and I'm really happy with the results! Not a flaw to be found. It is like 38F here, so quickly back in the garage to crack open a few beers and apply a nice coat of wax! The wife helping of course.

Also got the ZL1 addons front rock guards installed. I think they look good with the ACS side skirts and should offer some protection.

The car looks amazing

[Exgermanowner]

Thanks for the additional shot, car looks awesome

[metros11]

How do I follow a thread?

[Ryanbabz71]

nice car. great job getting it to where it is now

[Gabhart]

All - I just wasn't completely happy with the paint as there were some swirls, very light scratches and halos over some areas of the paint. You could see where the factory made attempts to buff out imperfections, but it just wasn't very good.

Soooo... after some 25-30 hours of correcting and polishing with my Flex DA, here is the finished product. I pulled it out in the sun for some final inspecting and I'm really happy with the results! Not a flaw to be found. It is like 38F here, so quickly back in the garage to crack open a few beers and apply a nice coat of wax! The wife helping of course.

Looks fantastic. One step polish? What products did you use? Black is a real pita but when it's right nothing looks better!

[4mulafastech]

Originally Posted by Soleil

The car looks amazing

Thanks!

[4mulafastech]

Originally Posted by Exgermanowner

Thanks for the additional shot, car looks awesome

Thank you! I'm very happy with the quality of the ACS rockers. I recommend getting a couple spring clips. They really helped make the install easy.