[ninetres]

My Corsa extreme axle back has been delivered. My friend owns Caliber Customs and will be building a custom mid X section that connects to the primary cats. That way I can drop the OEM exhaust in one shot without cutting, and will essentially have a full Corsa catback that removes the secondary cats. Can't wait! Sorry. Excited. Likely won't be until late September though. He's slammed.

/pointless post

[gdgraph]

You've got almost the same scenario here if you tried to do that. The Borla axleback systems are designed to slide over the stock pipe and clamp down so the rear section of the Borla midpipe is the same diameter as stock so you would be butting up the midpipe to the stock NPP pipe and either need a sleeve joint (and risk a small leak) or have it welded.

The mid pipes would not slide over the stock exhaust because the expanded part is on their axlebacks.

Originally Posted by SSTony

If you got the entire borla system without the mufflers would you be able to clamp this system to the muffler in the back? Worst case Weld it?

Sound like its smarter to do that since this unit will remove the secondary cats and bolt right after the primary cats all the way back to the NPP muffler

[SSTony]

If you had a pipe expander problem solved

[gdgraph]

Originally Posted by SSTony

If you had a pipe expander problem solved

This is true, you could slide it right in and clamp it down

[StateOfMind415]

If you want to go the clamp route, use this product (https://www.summitracing.com/parts/vpe-1176).

It's a full seal all around that fits perfect over the stock pipe. Before I went full borla atak catback, I had #60606 xpipe butt clamped to the stock npp muffler. No leaking issues and great quality.

[david borla]

Originally Posted by Ventmaster

Hey David- you can see there is more than a little interest in this product. What do you say? There's alot of of us with a desire for an "Off-road only" affordable 2nd cat delete option. How about a "limited time offer" for the DIYer's out here? I'm referring to part #'s 55940 & 55941.

We'd really appreciate it !
Thank you for considering it.

We're going to do this. Stay tuned.

[Techn9cian805]

Originally Posted by david borla

We're going to do this. Stay tuned.

[Tr6]

Originally Posted by david borla

We're going to do this. Stay tuned.

That's awesome!

Side note, I had my bank 1 cat replaced under warranty. Apparently it went bad @ 10k miles. Thank you warranty!

[Ventmaster]

Originally Posted by david borla

We're going to do this. Stay tuned.

Anxiously awaiting this product! I believe it will prove to be very popular.

Just let me know when it's available and I'll buy for sure!

I'll also share the install and results with other C6 members! Thank you Borla Exhaust!

[Ventmaster]

Originally Posted by gdgraph

This is true, you could slide it right in and clamp it down

"That's what she said!"

Sorry guys- its Friday and I just couldn't help it because I'm so excited about david borla's post!

[SK GT]

Originally Posted by david borla

We're going to do this. Stay tuned.

I have read through this thread and still somehow confused.

I have a stock NPP car. I just want the pipe section to replace the secondary cats.

Is that available now or is that what people are asking for?

Sorry for my brain

[Ventmaster]

Originally Posted by SK GT

I have read through this thread and still somehow confused.

I have a stock NPP car. I just want the pipe section to replace the secondary cats.

Is that available now or is that what people are asking for?

Sorry for my brain

Yes this is the interest I was referring to and David Borla seems to be receptive (post#104) to making 2.75 pipes available for purchase to bolt inline with the stock (NPP) exhaust that will delete the 2nd cat.

I'm hoping there will be some announcement about a new product offering, but just to be sure I was expecting to inguire directly to Borla if no new products are mentioned in the near future.

The more inquires the better, so give'em a call as well! We're looking for part #'s 55940 & 55941

[SK GT]

Originally Posted by Ventmaster

Yes this is the interest I was referring to and David Borla seems to be receptive (post#104) to making 2.75 pipes available for purchase to bolt inline with the stock (NPP) exhaust that will delete the 2nd cat.

I'm hoping there will be some announcement about a new product offering, but just to be sure I was expecting to inguire directly to Borla if no new products are mentioned in the near future.

The more inquires the better, so give'em a call as well! We're looking for part #'s 55940 & 55941

Thank you vent. That helps a lot.

[Sunsnare98]

Tru