Headliner Peeling back - Page 3

pdrumans · 06-27-2016, 05:21 PM

Quote:

Originally Posted by pdrumans

Cap it off with the same trim they put on the doors to protect the edges when you open from door dings. That or something similar could possibly be used to cap the edges of the headliner. Some type of rubber/plastic tubing that opens on one side of the edge. Probably something like it could be found at Home depot.

Like this

Evil-Bee-NH · 07-03-2016, 10:14 AM

Same issue GM just letting us down on things like this is the same old crap you'd think with the price increase they'd have better quality control.

SPARTAN sui · 08-02-2016, 01:35 PM

I just noticed mine is doing the same thing as of today. Yay! I do like the idea of the u channel molding to cover it up, at least until the headliner is revised. I don't want the next headliner to just do the same thing down the road. It was fine until now.

nbryant · 08-02-2016, 04:06 PM

I started to do some research to find a soft "u" channel to slip over the leading edge. Need to look into it but do plan on doing this instead of dealing with the dealer.

SPARTAN sui · 08-02-2016, 04:43 PM

Please let me know if you find some that works! I don't want anyone to pull things off my car unless there's a revised part or it's something serious. This is mostly minor. As long as it doesn't get worse I'm fine with using u channel molding to make it look better.

Richard0nee · 08-02-2016, 05:06 PM

+1

I don't think the dealer can fix it so it's pointless taking it in :/

Jones732 · 08-02-2017, 04:22 PM

Did you ever get this fixed? my 2017 Camaro has this issue.

Jones732 · 08-02-2017, 04:23 PM

Did anyone try the U Strip?

aBee150 · 09-10-2018, 11:21 PM

Hey guys, apologies for reviving this old post. I searched everywhere for someone to try out the u-channel thing and couldn't find anything

so i decided to do it myself!

Here is what I did ... I bought two different rubber trims and ended up liking the second one more. It was more discrete and a lot smoother. I bought 1 meter of trim and it was a tad bit too short but not enough for me to care. The install wasn't difficult, just annoying.

Enjoy guys!

08-02-2016, 01:35 PM	#31
SPARTAN sui PC Technician Drives: 2016 Hyper Blue 2SS Join Date: May 2012 Location: North Dakota Posts: 2,161	I just noticed mine is doing the same thing as of today. Yay! I do like the idea of the u channel molding to cover it up, at least until the headliner is revised. I don't want the next headliner to just do the same thing down the road. It was fine until now. __________________

08-02-2016, 04:06 PM	#32
nbryant Drives: 2016 2SS Red Hot Join Date: May 2016 Location: Southern Maryland Posts: 627	I started to do some research to find a soft "u" channel to slip over the leading edge. Need to look into it but do plan on doing this instead of dealing with the dealer. __________________ 2SS, A8, NPP, Nav, Sun Roof, Bose Audio, MM Catch Can, RPI chin splitter

08-02-2016, 04:43 PM	#33
SPARTAN sui PC Technician Drives: 2016 Hyper Blue 2SS Join Date: May 2012 Location: North Dakota Posts: 2,161	Please let me know if you find some that works! I don't want anyone to pull things off my car unless there's a revised part or it's something serious. This is mostly minor. As long as it doesn't get worse I'm fine with using u channel molding to make it look better. __________________

09-10-2018, 11:21 PM	#37
aBee150 @NHTFALL Drives: 2018 Camaro 1SS 1LE Join Date: Apr 2018 Location: Los Angeles California Posts: 26	Sorry for Reviving this old post Hey guys, apologies for reviving this old post. I searched everywhere for someone to try out the u-channel thing and couldn't find anything so i decided to do it myself! Here is what I did ... I bought two different rubber trims and ended up liking the second one more. It was more discrete and a lot smoother. I bought 1 meter of trim and it was a tad bit too short but not enough for me to care. The install wasn't difficult, just annoying. Enjoy guys! __________________ @NHTFALL

07-03-2016, 10:14 AM	#30
Evil-Bee-NH 603 Camaros Drives: 2017 NGM I4 1LT Coupe Join Date: May 2012 Location: Manchester, NH Posts: 6,779 View My Garage	Same issue GM just letting us down on things like this is the same old crap you'd think with the price increase they'd have better quality control.

08-02-2016, 05:06 PM	#34
Richard0nee Drives: 2016 SS M6, NPP Join Date: Apr 2016 Location: Hawthorne, CA Posts: 1,957	+1 I don't think the dealer can fix it so it's pointless taking it in :/

08-02-2017, 04:22 PM	#35
Jones732 Drives: 1LT Join Date: Jun 2017 Location: Ft Lauderdale Posts: 26	Did you ever get this fixed? my 2017 Camaro has this issue.

08-02-2017, 04:23 PM	#36
Jones732 Drives: 1LT Join Date: Jun 2017 Location: Ft Lauderdale Posts: 26	Did anyone try the U Strip?

User Name		Remember Me?
Password