|
|
#1 |
![]() Drives: Zl1 Camaro Join Date: Oct 2023
Location: Wisconsin
Posts: 44
|
supercharger coolant pump
Does the pump for the supercharger coolant always run or does something trigger it to turn on? And if something triggers it would it be bad to just have it run all the time?
__________________
2018 Zl1 1le 6speed
2” Kooks headers ,green cats full exhaust JLT intake, BTR Stage 2 cam,Mighty Mouse catch can Innovations west damper 9.25” lower 107mm throttle body, Mpi lid, flex fuel Full SPL rear suspension, DSX twin intank pumps |
|
|
|
|
|
#2 |
![]() Drives: 2022 ZL1 Join Date: Sep 2024
Location: SWFL
Posts: 131
|
Pretty sure it runs all the time the engine is running.
__________________
2022 ZL1 M6 Coupe
|
|
|
|
|
|
#3 |
|
Drives: 2021 ZLE, C5 Z06 6.0L Procharged Join Date: Mar 2023
Location: South Carolina
Posts: 578
|
It is a "Key On" device and not controlled with a command in HPTuners. You will get a soft code if the Canbus determines the pump is not running or the relay has failed.
|
|
|
|
|
|
#4 |
![]() Drives: Zl1 Camaro Join Date: Oct 2023
Location: Wisconsin
Posts: 44
|
So another question can you run a trunk coolant tank with the factory pump? Or do you need to run a pump by the trunk coolant tank and bypass the factory one or do you run both?
__________________
2018 Zl1 1le 6speed
2” Kooks headers ,green cats full exhaust JLT intake, BTR Stage 2 cam,Mighty Mouse catch can Innovations west damper 9.25” lower 107mm throttle body, Mpi lid, flex fuel Full SPL rear suspension, DSX twin intank pumps |
|
|
|
|
|
#5 | |
|
Moderator
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: New Ipswich NH
Posts: 6,350
|
Quote:
If you do decide to run a trunk tank, you either need to replace the weak factory pump with something like a CWA150, or add another factory pump to move the water from the back of the car to the front (so you’d run both pumps in the case).
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, ATI 8L90, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors & BB HPFP, TooHighPSI/Katech port injection, 15” conversion 1066 WHP STD/1027 SAE, 9.10@152.5 (new times coming)
|
|
|
|
|
|
|
|
|
|
Post Reply
|
| Thread Tools | |
|
|