For those that need to pull the engine - Page 2

Future1LE · 02-19-2025, 01:58 PM

Quote:

Originally Posted by Evansa22

Maybe this helps in the meantime time

Thanks for that! Yea if you can send some pics when you have a moment it will be greatly appreciated. I will be swapping it with the engine still in the car so just seeing the complete picture of it outside the engine bay can help with reference. Just ordered my parts so will probably get to it when I get a day off. When the belt broke, it also somehow broke one of the coolant line Tee connector so I got to replace that as well. I know 2 of the 3 belt broke, I think the AC belt still on. I believe it was the supercharger belt and the belt to the alternator that broke.

Future1LE · 02-19-2025, 03:03 PM

Quote:

Originally Posted by Ringmaster72

FUTURE1LE in regards to the harness......

I went through this last year. I had a belt issue destroy my harness and had a hard time finding the part. I used this part number: 12734111. If I remember there was slight difference but it worked without any wire changes. I think the "bracket" was slightly different. Here is the exact one I used. I also have the TSP DOD delete timing cover, so it is slightly different than stock and does need that plug.
https://www.ebay.com/itm/296886665875

Ring master, aside from the harness, was there anything I would need to buy? Cam phaser magnet?

Evansa22 · 02-19-2025, 06:34 PM

Not sure if you can PM pictures, but if you can I wasn't able to figure it out. So I'll put them here. I'm pointing to where the wires are routed in the last one

Evansa22 · 02-19-2025, 07:40 PM

This should help as well

Future1LE · 02-25-2025, 11:56 AM

Thank you for all the pictures and diagram! My parts are coming in so I will be replacing and getting the car back up and running.

Bangkok_ZL1 · 03-03-2025, 06:52 PM

Nice

02-19-2025, 06:34 PM	#17
Evansa22 Drives: 2018 HBM ZLE Join Date: Aug 2017 Location: In the garage Posts: 891	Not sure if you can PM pictures, but if you can I wasn't able to figure it out. So I'll put them here. I'm pointing to where the wires are routed in the last one Attached Images __________________ Check out my youtube channel https://www.youtube.com/@evans.educa...ocxUzC1ferqeg8 Full SPL suspension / Ported blower / NW 103mm / Rotofab BG / 2" Headers / Ported heads / Upgraded Valvetrain w/ DOD delete / Custom 38% Cam / C7.R Timing chain / Katech Oil pump / BMR motor mounts and chassis braces / Katech 174* Thermostat / Pierburg Supercharger coolant pump / PLM HX / JMS voltage booster / ATI Damper w/ 8.6 Lower / MM Mild catch can / ADM Resevoir / soon to come... Rebuilt Engine / XDI +30% injectors / PWR Oil cooler setup / GMS Hood bracket 760 Whp / 700 Wtq E50

02-19-2025, 07:40 PM	#18
Evansa22 Drives: 2018 HBM ZLE Join Date: Aug 2017 Location: In the garage Posts: 891	This should help as well Attached Images __________________ Check out my youtube channel https://www.youtube.com/@evans.educa...ocxUzC1ferqeg8 Full SPL suspension / Ported blower / NW 103mm / Rotofab BG / 2" Headers / Ported heads / Upgraded Valvetrain w/ DOD delete / Custom 38% Cam / C7.R Timing chain / Katech Oil pump / BMR motor mounts and chassis braces / Katech 174* Thermostat / Pierburg Supercharger coolant pump / PLM HX / JMS voltage booster / ATI Damper w/ 8.6 Lower / MM Mild catch can / ADM Resevoir / soon to come... Rebuilt Engine / XDI +30% injectors / PWR Oil cooler setup / GMS Hood bracket 760 Whp / 700 Wtq E50

03-03-2025, 06:52 PM	#20
Bangkok_ZL1 Flying around Thailand Drives: 2019 Camaro ZL1 Join Date: Oct 2020 Location: Bangkok, Thailand Posts: 620	Nice __________________ Mods - From JRE, the 125 RWHP Kit; From FI Interchillers, the Stage I Interchiller system, 5mm Supercharger/Head spacer plates, Heater blanket; From BMR Suspensions, Motor mounts, Cradle lockout Bushings; From Misc, Train horn in the Abandoned Heat Exchanger location using the exchanger bracket. From Banks, An I-Dash to read it all...

02-25-2025, 11:56 AM	#19
Future1LE Drives: 2020 Chevy Camaro ZL1 1LE Join Date: Nov 2017 Location: Earth Posts: 137	Thank you for all the pictures and diagram! My parts are coming in so I will be replacing and getting the car back up and running.

User Name		Remember Me?
Password