What did you do to your 6th Gen Camaro today?! - Page 1135

cdb95z28 · 01-10-2025, 03:49 PM

Quote:

Originally Posted by m6-lt1

Think I misunderstood you earlier and didn’t realize that the actual GM tool goes in the same order as the aftermarket one. Thank you for confirming that and that the tool is only supposed to run the right side.

I like how these coil covers look a lot. Reminds me of the LT2 as I think they are red on that engine. Is it hard to get them off? Haven’t found a video for that. Would love to get mine painted as well.

The coil covers are not bad to get off, T30 Torx, IIRC. Passenger side is a little tighter with the dipstick close. And you'll have to remove the PVC plastic lines.

cdb95z28 · 01-10-2025, 03:50 PM

Quote:

Originally Posted by SSDan

I like your work on the engine cover pieces. I went a similar route. I went with Hyper Blue, silver and black as those are the colors I have on the exterior. Getting the coil covers off is easy. They just bolt on and the bolts are easy to get to. The covers also paint up well using rattle can paint of your color choice.

Nice! I dig the silver. It looks perfect.

cdb95z28 · 01-10-2025, 03:51 PM

Lookin good fellas. Maybe I'll do the LT2 intake someday, the cover looks sooooo good.

SSShark · 01-13-2025, 11:40 AM

Bought this.

*Joshinator99* · 01-13-2025, 11:49 AM

Quote:

Originally Posted by SSShark

Bought this.

Nice! I love Griots stuff. I’ve still got their orbital buffer from 20 years ago so I can’t bring myself to part with something that still works perfectly.

SSShark · 01-13-2025, 12:08 PM

Quote:

Originally Posted by Joshinator99

Nice! I love Griots stuff. I’ve still got their orbital buffer from 20 years ago so I can’t bring myself to part with something that still works perfectly.

I still have a corded Black and Decker variable drill from 1989 that works great. Same here, why get rid of it. So I upgraded from a Porter Cable and love this new Griots G9! I used it yesterday for some spotting that was forming on the top. It worked great.

willzilla · 01-13-2025, 12:17 PM

Finally installed the BMR toe rods with rubber boots...

Just have sway bars and end links left to go

Patriot Motorsports USA · 01-13-2025, 11:01 PM

Just went on a road trip from Road Atlanta to South Carolina to create some new fun parts for my ZLE!!

Noticed that I got nearly 2-3mpg better fuel economy cruising with 16% Ethanol than I did at E10... must be the added timing adding the torque down low!!

https://www.youtube.com/shorts/PfP7kugr4YM

Arizona_Droptop · 01-17-2025, 09:19 AM

Finally!

oldguy0130 · 01-17-2025, 10:27 AM

Quote:

Originally Posted by Arizona_Droptop

Finally!

Congrats!!!

p47dman · 01-17-2025, 12:34 PM

Funny how it always becomes prettier on that day

Smokin19 · 01-17-2025, 03:13 PM

Quote:

Originally Posted by Arizona_Droptop

Finally!

It's a great feeling isn't it. Now you got more mod money. Congratulations

DeuceCam · 01-18-2025, 04:49 PM

Sunrise drive on highway 88 out past Tortilla Flat.

SPLATT · 01-18-2025, 09:08 PM

I went out and bought one. A 2016 2SS.
Name: 474514811_10161387454564006_2494363431290124569_n.jpg
Views: 488
Size: 438.4 KB

01-10-2025, 03:51 PM	#15879
cdb95z28 Drives: 2022 1SS 1LE A10 BCD WCT+PDR Join Date: Mar 2008 Location: Johnstown, PA Posts: 3,827	Lookin good fellas. Maybe I'll do the LT2 intake someday, the cover looks sooooo good. __________________ 2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD "KEEP THE FAITH"-Fbodfather

01-13-2025, 11:40 AM	#15880
SSShark Drives: '23 1SS Sharkskin A10 Join Date: Sep 2018 Location: South Florida Posts: 1,536	Bought this. Attached Images __________________ Kooks 1-7/8" Long Tube Headers l Kooks Hi-Flow Cats l Kooks X-Pipe l Borla S-Type NPP Exhaust GPI SS2 Cam l GPI Ported Heads l Katech Oil Pump l Katech Valley Cover l GPI Hardened Pushrods BTR Valve Springs l Johnson 2110R Lifters l Ported LT2 Intake Manifold l Ported 95mm LT5 TB Rotofab CAI l Mishimoto Catch Can l DSX Flex Fuel Sensor l 93/E85 Tune BMR Rear Cradle Lockout Kit l Katech VVT Delete kit l CHE Trunion Upgrade l LT1 HPFP LME/GPI Timing Chain Guide l Katech Timing Chain l AFM Delete Halo Tunnel Brace l MRR 1LE Wheels l Goodyear SC3 1LE Tire Package l GM Lowering Kit

01-13-2025, 11:01 PM	#15884
Patriot Motorsports USA Drives: 2021 ZLE, C5 Z06 6.0L Procharged Join Date: Mar 2023 Location: South Carolina Posts: 574	Roadtrip!! Just went on a road trip from Road Atlanta to South Carolina to create some new fun parts for my ZLE!! Noticed that I got nearly 2-3mpg better fuel economy cruising with 16% Ethanol than I did at E10... must be the added timing adding the torque down low!! https://www.youtube.com/shorts/PfP7kugr4YM

01-17-2025, 09:19 AM	#15885
Arizona_Droptop Drives: 2017 Camaro 2SS Join Date: Feb 2021 Location: Gilbert, Arizona Posts: 52	I paid mine off today Finally! Attached Images

01-18-2025, 04:49 PM	#15889
DeuceCam Drives: LT1 Join Date: Apr 2024 Location: AZ Posts: 323	Sunrise drive on highway 88 out past Tortilla Flat. Attached Images

01-17-2025, 12:34 PM	#15887
p47dman Drives: 2024 Camaro 1SS Join Date: Mar 2024 Location: Minnesota Posts: 435	Funny how it always becomes prettier on that day

01-18-2025, 09:08 PM	#15890
SPLATT Drives: 16 Camaro 2SS MT6 Join Date: Jan 2025 Location: Deep in the woods of Washington Posts: 61	I went out and bought one. A 2016 2SS.

User Name		Remember Me?
Password