|
|
#1 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,191
|
Oil Consumption - LT4 (Mod)
FWIW and since this is a popular question:
My engine uses a notable amount of "0", but an immeasurably small amount of "5" (right)
__________________
2020 ZL1LE A10.
LME LT4 390 short block, LME CID Heads, Kong E2650, FBO. 15" conversion, MT ET Street R 325/15. 100 octane: 1045hp/1055tq. 100 octane + Meth (1x10+): 1117 hp/1067 tq |
|
|
|
|
|
#2 |
![]() ![]() ![]() Drives: 2019 ZL1 Riverside Join Date: Apr 2020
Location: Charlotte, NC
Posts: 1,139
|
What is a "notable amount"? Picture is cut off, is it 5W-40? Viscosity at 100 C = 11.1 (5W-30) and 12.9 (0W-40)
Standard Mobil 1 is a mediocre oil |
|
|
|
|
|
#3 | |
![]() ![]() ![]() ![]() ![]() Drives: 2019 ZL1 Join Date: Mar 2019
Location: NJ
Posts: 1,537
|
Quote:
JSH try motul x-clean gen 2 5w 40. Great stuff, much less oil consumption then Mobil 1. Not really a fan of the esp 0w40, viscosity seems to be less then other 40 type oils. I never really saw anything past 60psi unless oil was freshly changed at WOT.
__________________
928rwhp - 93 | 1040rwhp/898rwrq - E65 SAE
LME 377 LT4 Short Block | Magnuson 2650 80mm upper w/13% lower (9.06) | DSX Lid & Valve Covers | CSP Custom Cam w/32% fuel lobe | CID Heads | NW 103mm TB | Roto Fab Big Gulp | CSP 2" Headers w/Green GESI Gen 2 Cats | Borla 3" Full Cat Back w/ S-Type| Mighty Mouse Wild Catch Can| Custom Holley Low side Fuel system| TooHigh PSI Port Injection w/Holley Controller | Forced Inductions Interchiller w/2 gallon fender tank | TK Performance built 10L90 |
|
|
|
|
|
|
#4 |
![]() ![]() ![]() Drives: 2019 ZL1 Riverside Join Date: Apr 2020
Location: Charlotte, NC
Posts: 1,139
|
I run Castrol Edge Extended Performance exclusively now, best oil on the market imo for the price - couldn't give two sh*ts about Dexos, that's just GM mark-up, has no bearing on real world oil performance and Castrol meets all the (more stringent) Euro specs anyway
If you're going to run M1 at least use M1 EP with the add pack |
|
|
|
|
|
#5 |
|
Thank you Al Oppenheiser!
Drives: Red Hot A10 ZL1 Convertible Join Date: Jun 2017
Location: Sarasota, FL
Posts: 5,178
|
Blackstone lab tests when?
|
|
|
|
|
|
#6 | |
![]() ![]() ![]() ![]() ![]() Drives: 2019 ZL1 Join Date: Mar 2019
Location: NJ
Posts: 1,537
|
Quote:
I agree, its mostly for emissions crap. Which any of us have highly modified cars, non stock cats, headers etc. Ill be trying the driven racing oil DI 0-40 next
__________________
928rwhp - 93 | 1040rwhp/898rwrq - E65 SAE
LME 377 LT4 Short Block | Magnuson 2650 80mm upper w/13% lower (9.06) | DSX Lid & Valve Covers | CSP Custom Cam w/32% fuel lobe | CID Heads | NW 103mm TB | Roto Fab Big Gulp | CSP 2" Headers w/Green GESI Gen 2 Cats | Borla 3" Full Cat Back w/ S-Type| Mighty Mouse Wild Catch Can| Custom Holley Low side Fuel system| TooHigh PSI Port Injection w/Holley Controller | Forced Inductions Interchiller w/2 gallon fender tank | TK Performance built 10L90 |
|
|
|
|
|
|
#7 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 13,432
|
Quote:
Although, truth to be told, yours isn't due till what, 2023 or 2024? Plenty of time to score a stock NPP setup to bolt on for those 10 minutes Let's hope the "no aftermarket tune" nonsense doesn't disseminate from CA.On topic, I'll try the Motul 5W-40 you suggested when the time comes, it's fairly hot down here. Thanks for the tip (as always).
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle Terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
|
|
|
#8 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2024 CT5-V Blackwing Join Date: Sep 2020
Location: GA
Posts: 3,549
|
|
|
|
|
|
|
#9 | |
![]() ![]() ![]() ![]() ![]() Drives: 2019 ZL1 Join Date: Mar 2019
Location: NJ
Posts: 1,537
|
Quote:
Its supposed to be very good oil for our LT4's, but i cant find much data on it. I know CSP is working with them and they are now stocking it as well for use on their stuff. I would rather have the extra protection without all the marketing shennegins that go along with dexos/emissions. The motul im running now though seems like a good quality 100% synthetic. New bottles of mobil 0w 40 label has changed too, it no longer says "Full synthetic" not sure if it means anything. Just says Synthetic now. Not sure why the change.
__________________
928rwhp - 93 | 1040rwhp/898rwrq - E65 SAE
LME 377 LT4 Short Block | Magnuson 2650 80mm upper w/13% lower (9.06) | DSX Lid & Valve Covers | CSP Custom Cam w/32% fuel lobe | CID Heads | NW 103mm TB | Roto Fab Big Gulp | CSP 2" Headers w/Green GESI Gen 2 Cats | Borla 3" Full Cat Back w/ S-Type| Mighty Mouse Wild Catch Can| Custom Holley Low side Fuel system| TooHigh PSI Port Injection w/Holley Controller | Forced Inductions Interchiller w/2 gallon fender tank | TK Performance built 10L90 |
|
|
|
|
|
|
#10 | |
![]() ![]() ![]() ![]() ![]() Drives: 2019 ZL1 Join Date: Mar 2019
Location: NJ
Posts: 1,537
|
Quote:
I will move!
__________________
928rwhp - 93 | 1040rwhp/898rwrq - E65 SAE
LME 377 LT4 Short Block | Magnuson 2650 80mm upper w/13% lower (9.06) | DSX Lid & Valve Covers | CSP Custom Cam w/32% fuel lobe | CID Heads | NW 103mm TB | Roto Fab Big Gulp | CSP 2" Headers w/Green GESI Gen 2 Cats | Borla 3" Full Cat Back w/ S-Type| Mighty Mouse Wild Catch Can| Custom Holley Low side Fuel system| TooHigh PSI Port Injection w/Holley Controller | Forced Inductions Interchiller w/2 gallon fender tank | TK Performance built 10L90 |
|
|
|
|
|
|
#11 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 7,629
|
I switched to Castrol Edge 5w50 years ago on my H/C/I 4th gen after reading a lot of good stuff on the oil guru forums. Even though it is "rated" 5w50 it was tested to work well with factory and several aftermarket drop in lifters. The Valve train was much quieter compared to Mobil One. I now run Castrol Edge 5w30 in my 6th gen...very little consumption.
I change my oil once a season and it's never been low. One thing you will learn about oil is that the viscosity ratings are about as accurate as shoe and clothing sizes. Just because it says 5w30 doesn't mean that is what it actually is.
__________________
2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel |
|
|
|
|
|
#12 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,191
|
A notable amount of 0W-40 is, say, ~1 Qt./1k miles. I don't see that it's using any 5W-30.
__________________
2020 ZL1LE A10.
LME LT4 390 short block, LME CID Heads, Kong E2650, FBO. 15" conversion, MT ET Street R 325/15. 100 octane: 1045hp/1055tq. 100 octane + Meth (1x10+): 1117 hp/1067 tq |
|
|
|
|
|
#13 | |
![]() ![]() ![]() ![]() ![]() Drives: 2019 ZL1 Join Date: Mar 2019
Location: NJ
Posts: 1,537
|
Quote:
If your going through the 0w40 your rate of consumption is probably the same or worse on 5w 30 tbh as its thinner. I've given up checking oil in these cars, because one day it will read full, next day its low half quart. It's quite possible the 5w 30 just drains better/faster back into the pan. I just keep it in the middle of the crosshatch and call it a day.
__________________
928rwhp - 93 | 1040rwhp/898rwrq - E65 SAE
LME 377 LT4 Short Block | Magnuson 2650 80mm upper w/13% lower (9.06) | DSX Lid & Valve Covers | CSP Custom Cam w/32% fuel lobe | CID Heads | NW 103mm TB | Roto Fab Big Gulp | CSP 2" Headers w/Green GESI Gen 2 Cats | Borla 3" Full Cat Back w/ S-Type| Mighty Mouse Wild Catch Can| Custom Holley Low side Fuel system| TooHigh PSI Port Injection w/Holley Controller | Forced Inductions Interchiller w/2 gallon fender tank | TK Performance built 10L90 |
|
|
|
|
|
|
#14 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,191
|
Quote:
__________________
2020 ZL1LE A10.
LME LT4 390 short block, LME CID Heads, Kong E2650, FBO. 15" conversion, MT ET Street R 325/15. 100 octane: 1045hp/1055tq. 100 octane + Meth (1x10+): 1117 hp/1067 tq |
|
|
|
|
|
|
|
|
|
Post Reply
|
| Thread Tools | |
|
|