Official 6th Gen 1/4 Mile V8 Fast List - Page 111

smokinzx14r · 10-01-2018, 02:57 PM

After 8 weeks of rain outs I got to make two passes last Sat .. The place was too packed to get more than 2 passes ..

Tires used on the pass: Stock Goodyear run flats
Performance Mods (if any): None
Category submitted for: Please List the Category or Category # Bone stock 1SS A8
R/T...........124
60'............. 1.81
330'........... 5.146
660'........... 7.87
660’ mph... 89.30
1000'.......... 10.198
1320'.......... 12.17
1320’ mph… 112.81
Name of the track: BMP FL
Date of pass: Sep/29/2018
Weather conditions: Include Density Altitude if known. @ 6:00 PM DA was Density Altitude: 2291 feet
Relative Density: 93.47 %

Please add me to the Bone Stock A8 list ... Thanks ..

smokinzx14r · 10-01-2018, 03:21 PM

Quote:

Originally Posted by smokinzx14r

After 8 weeks of rain outs I got to make two passes last Sat .. The place was too packed to get more than 2 passes ..

Tires used on the pass: Stock Goodyear run flats
Performance Mods (if any): None
Category submitted for: Please List the Category or Category # Bone stock 1SS A8
R/T...........124
60'............. 1.81
330'........... 5.146
660'........... 7.87
660’ mph... 89.30
1000'.......... 10.198
1320'.......... 12.17
1320’ mph… 112.81
Name of the track: BMP FL
Date of pass: Sep/29/2018
Weather conditions: Include Density Altitude if known. @ 6:00 PM DA was Density Altitude: 2291 feet
Relative Density: 93.47 %

Please add me to the Bone Stock A8 list ... Thanks ..

Yes I know , include the full time ticket .. So here it is ..This is the way we get them and nothing I can do about it ..

laynlo15 · 10-02-2018, 07:07 AM

Great pass Dub, glad you chose the Hoosiers for that stick car, you'll save part in the long run. If you could knock off a little on your 60 ft you could get really close to that 10 second pass.

PRAY · 10-02-2018, 07:14 AM

Quote:

Originally Posted by laynlo15

Great pass Dub, glad you chose the Hoosiers for that stick car, you'll save part in the long run. If you could knock off a little on your 60 ft you could get really close to that 10 second pass.

Lots left in thay car.

Dubchitts · 10-02-2018, 07:23 AM

Quote:

Originally Posted by laynlo15

Great pass Dub, glad you chose the Hoosiers for that stick car, you'll save part in the long run. If you could knock off a little on your 60 ft you could get really close to that 10 second pass.

Thanks! Hoping to get a few more runs in this year still and knock off alittle more time

Slidewayz-Jones · 10-02-2018, 04:59 PM

Hey guys sorry it took me a while to post these. I felt it was pretty amazing for the money. Only mods are,

Radials
Drop in filter
Pre cat delete
Nitrous/no tune.

laynlo15 · 10-02-2018, 05:07 PM

Assuming your the car in the 11's.

laynlo15 · 10-02-2018, 05:08 PM

Dub, what RPM are you launching at?

Slidewayz-Jones · 10-02-2018, 05:13 PM

Quote:

Originally Posted by laynlo15

Dub, what RPM are you launching at?

I’m slipping the clutch, rolling out at about 5500. I modified my engagement switch for nitrous at around 95% throttle.

laynlo15 · 10-02-2018, 05:19 PM

Jones, sounds like your getting the combination down. M6s are not easy to launch but your doing it pretty well.

Slidewayz-Jones · 10-02-2018, 05:23 PM

Quote:

Originally Posted by laynlo15

Jones, sounds like your getting the combination down. M6s are not easy to launch but your doing it pretty well.

I appreciate it man. I believe in the driver mod. This was on a almost 100 degree night. I’m gonna run again soon I’m sure I can drop into the 10’s.
I originally come from racing 2j and SR swapped 240s. Trying to get back into it.

Dubchitts · 10-02-2018, 07:34 PM

Quote:

Originally Posted by laynlo15

Dub, what RPM are you launching at?

4300 ish. I am having some tire slip on my rims. I was going to try screws but ultimately decided to get beadlocks this winter so i don't want to ruin these wheels. I gotta get brave and try NLS on the 1>2 again. I'd tried it a few times before and it didn't work out. Works fine on the other shifts.

laynlo15 · 10-03-2018, 08:10 AM

I have mine screwed down, way cheaper then buying bead locks. I run 5 screws on each side of the wheel. Mine hooks on gravel with the Hoosiers and I didn't screw them down until I boosted mine as they were spinning on the wheel a lot.

Slidewayz-Jones · 10-04-2018, 05:43 PM

Make sure they don’t use a non alcohol based lubricant while mounting the tires on the wheel. I use hairspray or belt dressing as the lubricant. Sounds dumb but it worked on all my cars. No slip.

10-01-2018, 02:57 PM	#1541
smokinzx14r Drives: 2018 1SS Join Date: May 2015 Location: FL Posts: 184	After 8 weeks of rain outs I got to make two passes last Sat .. The place was too packed to get more than 2 passes .. Tires used on the pass: Stock Goodyear run flats Performance Mods (if any): None Category submitted for: Please List the Category or Category # Bone stock 1SS A8 R/T...........124 60'............. 1.81 330'........... 5.146 660'........... 7.87 660’ mph... 89.30 1000'.......... 10.198 1320'.......... 12.17 1320’ mph… 112.81 Name of the track: BMP FL Date of pass: Sep/29/2018 Weather conditions: Include Density Altitude if known. @ 6:00 PM DA was Density Altitude: 2291 feet Relative Density: 93.47 % Please add me to the Bone Stock A8 list ... Thanks .. Attached Images Last edited by smokinzx14r; 10-01-2018 at 03:03 PM. Reason: Added DA Numbers ..

10-02-2018, 07:07 AM	#1543
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,882	Great pass Dub, glad you chose the Hoosiers for that stick car, you'll save part in the long run. If you could knock off a little on your 60 ft you could get really close to that 10 second pass.

10-02-2018, 05:07 PM	#1547
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,882	Assuming your the car in the 11's.

10-02-2018, 05:08 PM	#1548
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,882	Dub, what RPM are you launching at?

10-02-2018, 05:19 PM	#1550
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,882	Jones, sounds like your getting the combination down. M6s are not easy to launch but your doing it pretty well.

10-03-2018, 08:10 AM	#1553
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,882	I have mine screwed down, way cheaper then buying bead locks. I run 5 screws on each side of the wheel. Mine hooks on gravel with the Hoosiers and I didn't screw them down until I boosted mine as they were spinning on the wheel a lot.

10-04-2018, 05:43 PM	#1554
Slidewayz-Jones Drives: 2016 1SS M6 Join Date: Jan 2018 Location: South FL Posts: 71	Make sure they don’t use a non alcohol based lubricant while mounting the tires on the wheel. I use hairspray or belt dressing as the lubricant. Sounds dumb but it worked on all my cars. No slip.

User Name		Remember Me?
Password