You are browsing camaro6 
05-29-2025, 09:32 PM
|
#1 |
|
Banned
Drives: 2023 Silverado z71 Join Date: Jul 2024
Location: Virginia
Posts: 12
|
Does anyone else notice
Every 6th gen Camaro I’ve seen has waves going down the sides of both quarter panels right over the wheel arches. Am I the only one that notices this? Tell me I’m not crazy
|
|
|
|
05-29-2025, 09:47 PM
|
#2 |
            
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 13,151
|
Can you post a picture of these waves?
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
|
05-30-2025, 12:41 AM
|
#3 |
|
Banned
Drives: 2023 Silverado z71 Join Date: Jul 2024
Location: Virginia
Posts: 12
|
Go out and look at both of your 1/4s from different angles. About 6-8” up from the wheel arches going parallel with the ground there are ripples, almost like warping. I’ve seen it on every one. Hard to photograph but it’s there
|
|
|
|
|
05-30-2025, 02:42 AM
|
#4 | |
 
Drives: 2022 camaro 2SS Join Date: Apr 2023
Location: Oklahoma
Posts: 194
|
Quote:
|
|
|
|
|
|
05-30-2025, 06:54 AM
|
#5 |
|
Banned
Drives: 2023 Silverado z71 Join Date: Jul 2024
Location: Virginia
Posts: 12
|
You won’t see it looking straight at it, you need to be about 5-6’ back.. it’s in certain angles
|
|
|
|
|
05-30-2025, 06:55 AM
|
#6 |
|
Banned
Drives: 2023 Silverado z71 Join Date: Jul 2024
Location: Virginia
Posts: 12
|
It’s from the sound deadening they rolled on the insides of the 1/4s from the factory
|
|
|
|
|
05-30-2025, 10:45 AM
|
#7 |
|
Wet Sand, its the orange peel in the paint making you think you see ripples. 3 stage paint correction will eliminate this.
__________________
2023 VOM Camaro 1SS NPP 6MT - 11/7/24 Delivered
2019 Garnet Red Camaro 1SS NPP 6MT - 8/11/24 Totaled by Red Light Runner |
|
|
|
|
05-30-2025, 10:18 PM
|
#8 |
 Drives: 2024 Camaro 1SS Join Date: Mar 2024
Location: Minnesota
Posts: 339
|
they must have fixed for 2024, or what you been smokin??
|
|
|
|
|
05-30-2025, 10:43 PM
|
#9 |
|
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 13,151
|
If it isn't the standard orange peel that buyers get as part of the factory paint job "for free" on all cars except Koenigsegg, I have no idea what OP is talking about.
Took another detailed look at my quarter panels from multiple angles, there are no "waves" in the panel (or the bumper) whatsoever.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
|
05-31-2025, 06:32 AM
|
#10 |
Drives: 2019 ZL1 "1LE" | 16 SS | 2017 F30 Join Date: Dec 2021
Location: Europe
Posts: 109
|
Are we talking about these lines?
 Might upload later a photo of it on my red camaro, if its more visible.
__________________
Callaway SC750 ZL1, DIY 1LE with added OEM 1LE Wheels, DSSV Suspension and 1LE Aero, FEA front control arms, DIY oil cooler, CWA 150 pump, bigger intercooler, BMR lockout kit, CTSV Brake Air Deflectors, Smooth idle cam, LS7 lifters, CHE trunnion bushings. Tuned by JRE
|
|
|
|
|
06-01-2025, 09:29 PM
|
#11 | |
|
Banned
Drives: 2023 Silverado z71 Join Date: Jul 2024
Location: Virginia
Posts: 12
|
Quote:
|
|
|
|
|
|
06-01-2025, 09:45 PM
|
#12 |
|
Banned
Drives: 2023 Silverado z71 Join Date: Jul 2024
Location: Virginia
Posts: 12
|
I do PDR, so I’m not full of shit. The 1/4s have slight imperfections running down the sides of them about 12” long horizontally where sound deadening has been installed on the insides of the 1/4s from the factory. Sorry I have an eye for this, and it’s literally on every 6th gen I’ve seen with my own eyes in person. Go out to your car, open the trunk and pull the liner back and look at the inside of the 1/4s. You’ll see what I’m talking about. You can literally touch the inside of the 1/4 with your finger lightly and see it on the outside the metal is so baby shit soft
|
|
|
|
|
06-02-2025, 09:21 AM
|
#13 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 7,560
|
I know what you are talking about but it's hard to notice so it's a non-issue imo. The 6th gen Camaro was a bargain for what it cost...especially the 2016-2018's before the price started going up.
__________________
 2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel |
|
|
|
|
06-02-2025, 11:48 AM
|
#14 |
|
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 13,151
|
Aha, I see. The curse of being a professional and noticing every itty-bitty flaw
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
