You are browsing camaro6 
09-15-2025, 05:19 AM
|
#1 |
|
Flying around Thailand
Drives: 2019 Camaro ZL1 Join Date: Oct 2020
Location: Bangkok, Thailand
Posts: 620
|
What is this Item and do I need to replace it?
I've just returned from the states (AZ) to notice this (pics) I'm not sure what this piece is, or what it does. It appears to have oil or grease coming from it. I haven't pulled the bottom Shrouds off yet. I will do this tonight. However, I just thought I would try to understand what's happening before I even get started. Cause it appears something needs replacing just below the pulley. Thanks once again forum.
__________________
Mods - From JRE, the 125 RWHP Kit; From FI Interchillers, the Stage I Interchiller system, 5mm Supercharger/Head spacer plates, Heater blanket; From BMR Suspensions, Motor mounts, Cradle lockout Bushings; From Misc, Train horn in the Abandoned Heat Exchanger location using the exchanger bracket. From Banks, An I-Dash to read it all...
|
|
|
|
09-15-2025, 07:40 AM
|
#2 |
           
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 7,641
|
Yes, it's the hydraulic tensioner...it needs replaced.
__________________
 2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel |
|
|
|
|
09-15-2025, 08:00 AM
|
#3 |
 
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 13,448
|
It's prone to leak and then fail prematurely, I had to replace mine last year as well. Part number is 12686229 or 12738403 (for a newer version).
A very easy job, fortunately, just take off the belts and make sure you de-tension it in the right direction (for some reason this thing and the supercharger tensioner go opposite ways).
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle Terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
|
09-15-2025, 09:34 AM
|
#4 | |
|
Flying around Thailand
Drives: 2019 Camaro ZL1 Join Date: Oct 2020
Location: Bangkok, Thailand
Posts: 620
|
Quote:
__________________
Mods - From JRE, the 125 RWHP Kit; From FI Interchillers, the Stage I Interchiller system, 5mm Supercharger/Head spacer plates, Heater blanket; From BMR Suspensions, Motor mounts, Cradle lockout Bushings; From Misc, Train horn in the Abandoned Heat Exchanger location using the exchanger bracket. From Banks, An I-Dash to read it all...
|
|
|
|
|
|
|
|
|
|
Post Reply
|
| Thread Tools | |
|
|
