Quote:
Originally Posted by Summit1le1ss
Good news is if you find one it doesn't matter what it looks like, it will need to be dismantled anyway, so don't worry about cosmetics. We just need the guts.
You can do a direct swap with the 2ss controls but the fan will remain on auto speed and must be adjusted through the radio for those not wanting to take circuit boards and switches apart. I drove like that for a few hours before deciding to take everything apart again and see about swapping things around.
Edit: just had another idea to simplify install. Hold on for this. Would be swap two parts and wire.
|
I will be just be adding the 2ss guts to the 1ss controls, seems like it will be so much simpler than trying to worry about the dual-zone and it's unlikely I would use that. I'm also adding the spectrum lighting to the stereo bezel, pickup up a vandalized head unit off a 2ss for the LEDs, I'm hanging tight for your final write-up.
No rush though.