View Single Post
Old 11-23-2025, 01:51 PM   #22
arpad_m


 
arpad_m's Avatar
 
Drives: 2018 Camaro 2SS A8
Join Date: Jul 2017
Location: East Tennessee
Posts: 13,448
Quote:
Originally Posted by The Maverick View Post
Any testing yet? Want to get a set but am interested in hearing your impressions!
Okay, so I did some testing on the "standard" version of the deflector trim piece at various speeds, up to a normal highway speed and back with the windows down, and the buffeting was 95% gone. Like magic. You can still feel a bit of rhythmic turbulence, but the product works and essentially solves the problem, no more deafening pressure waves, yay

There is a small fitment problem I noticed, though: the top of the triangle leaves a gap from the rubber door seal "plate" (first picture), presumably because the OEM part has a twist near the top edge that meshes better into the rubber (second picture) that Wilder Racing's replica doesn't. Feels like a small deal, though, and hopefully won't cause rain damage as the part does have foam padding around the middle section, similar to OEM, just wanted to call this out to give a full picture.

I'll try the large "track" variant at some point, too, but to be honest the "standard" one is already good enough for me, and I guess the "track" part provides the same effect to higher speed points rather than suppressing wind noise even further.

Quote:
Originally Posted by NashZL1 View Post
I just installed a similar product just yesterday on my Porsche Cayman from AWE. Install was simple with detailed instructions.

How hard are these to install?
Installation is trivial, this product uses the same clips as the OEM triangles. Pop the old ones off with a trim tool, press the new ones into the same clip and alignment holes in the door frame, done.
Attached Images
  
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq

Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle Terminator cam | LT4 FS & injectors | TSP forged pistons & rods
JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune

1100 - 1/30/18 | 2000 - 1/31/18
3000 - 2/06/18 TPW 2/26/18
3400 - 2/19/18 | 3800 - 2/26/18
4300 - 2/27/18 | 4B00 - 3/01/18
4200 - 3/05/18 | 4800 - 3/14/18
5000 - 3/16/18 | 6000 - 3/19/18
arpad_m is offline   Reply With Quote