Quote:
Originally Posted by S.Macias
Nope, probably could have saved myself a couple hundred dollars if I just modified the knuckle bolt beforehand, but I wanted to make sure I could get to -3 fronts without further issue. Figured it all ended up being hundreds of dollars cheaper than camber plates, so it’s a win in my book. But I believe just extending the bolt hole will let you hit -3 according to other forum post
https://www.camaro6.com/forums/showthread.php?t=526353 |
Yep, -3* is possible with just the strut mod. I can get -3.2* on one side and -3* on the other. Just needed to grind a tiny bit more on the latter to get match the other but I've been set on -3* anyway. I also have purchased the PP knuckles. If it helps with the wheel/tire assembly clearance then I won't have to run as thick of a spacer. I might bump up the camber too since it looks like I'm going to start running Pirelli DH slicks.
Great thread fellas! Thanks for the info
