Quote:
Originally Posted by cdb95z28
Front anti roll bar endlinks
|
Quote:
Originally Posted by atx_traveler
Yup, what cdb95z28 said. Check your sway bar end-links. These come loose all the time.
|
Thanks guys! After inspecting my end links, I can confirm it's the same nut. However, they're not missing at all lol. Matter of fact the ones on the passenger side are identical as my pictures above. Though, on the driver's side, it's just a regular nut (see pictures below). I'm guessing it was added over the nut as a precaution from a fix back in the days and it loosened up over time
That said, while I was under the car and taking a closer look, I spotted a crack in one of the control arm bushings on the driver's side (see picture below). I'd noticed it before, but back then it was only a bit worn around the edges with no actual cracks. Now it's quite noticeable
Lately and occasionally I do hear a clunking or clapping sound. Could this be the cause?
Also, could this explain the vibration I'm feeling between about 55-75 mph? I notice it more on the driver's side, especially through the pedals, though my wife senses the vibration a bit in the passenger side near her feet.
Thanks again for your help and time!
