Quote:
Originally Posted by Bumbleboy92
Appreciate the help, one (hopefully) final update.
It wasn’t the screw itself, rather the sheet metal that’s vibrating causing the ticking noise. (I tried a star washer on the bolt first and electrical tape with no luck then went back under to see again)
I was able to make the ticking noise by pushing up from beneath at that certain area. Didn’t happen pushing from the top and if I held the top it wouldn’t make the ticking noise.
After some deliberation, I settled on hammer first then silicone RTV if that didn’t work.
Attachment 1166155
I hammered these two sections with a small hammer, not enough to make impressions or dents. (Will take after photo once it stops raining)
No more ticking.  |
Nice effort to find the elusive tick.. I wouldn’t have gone that far to find it. But, if mine starts to tick, that’ll be the first place I’ll look. Thanks for sharing.