Quote:
Originally Posted by Msquared
As you probably already know, the big silver module in your pic is the Peripheral HMI Control Module, and the HMI Control Module is shown sitting next to it in the big Multiuse Bracket. No idea why the HMI isn't there per the service manual. However, in my 2019 1SS 1LE there also was no HMI but there was a Peripheral HMI. I have to assume that the HMI isn't needed on relatively low-optioned cars like ours? It would be interesting to see if a 2SS had an HMI.
|
My 2018 2SS definitely has an HMI module. It's a smaller black box that I found in the expected location indicated by the diagram above when I had to splice in a wire for the RGB footwell lighting kit.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq
Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle Terminator cam | LT4 FS & injectors | TSP forged pistons & rods
JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune
1100 - 1/30/18 | 2000 - 1/31/18
3000 - 2/06/18 TPW 2/26/18
3400 - 2/19/18 | 3800 - 2/26/18
4300 - 2/27/18 | 4B00 - 3/01/18
4200 - 3/05/18 | 4800 - 3/14/18
5000 - 3/16/18 | 6000 - 3/19/18