Quote:
Originally Posted by Standard
Do you have a link to something that explains this, or can you here for posterity? Both in the general and the specific case - by 'make things hard' what does it do and how do you get around it to make it work? (I'm guessing you mean the relearning for brand new tire sensors via the 'let air out of the tire' thing?)
|
I don't have a link, just personal experience. So my specific problem has been tire pressure sensors, I have gone through 3 sets since getting the IGLA and Compustar installed. I ruled out the Compustar because when my IGLA failed, the problem went away.
What happened was I got the wheels installed in January of this year and the IGLA in February. After the IGLA was installed, the installer reset everything on my dash, including the oil percentage (not sure if that was necessary). So basically when I got the car back it had to relearn everything and unbeknownst me at the time, the OBD2 port was blocked and the sensors would not relearn.
So I take it back to the tire installer for new sensors, and put it in service mode at that time. Everything goes great, the sensors relearn properly, then only 1 of the sensors unlearn. This happens to me again until my IGLA failed.
After they re-installed the IGLA I haven't had any issues except I no longer have a service mode lol.