Quote:
Originally Posted by G2K
Hi Guys was looking around on the site, found some information but not exactly what I was looking for and maybe start another useful tread as the one that exists if for ZL1's on the 8 ribs.
Currently my setup is 8.855 Lower / 3.375 Upper // Belt K100852HD
Im seeing about 15-16psi.
I have a 3.0 at home that I want to use.
Next belt down is a K100830HD which is almost 2in smaller... I would assume I would need to use the existing belt?
Anyone have this pulley combo? 8.855 / 3.0? What belt are you using?
Thanks in advance.
|
I’m running 9.25/3.25 and have a Dayco 5100880 so that probably doesn’t help you. But they offer belts in much smaller increments than what you described so I think you could pick one of these out (page 19 & 20):
https://www.daycoaftermarket.com/wp-...2019_GUIDE.pdf
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, ATI 8L90, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors & BB HPFP, TooHighPSI/Katech port injection, 15” conversion 1066 WHP STD/1027 SAE, 9.10@152.5 (new times coming)
|