Quote:
Originally Posted by WhiteMale
Any one have or verify the frame mounts at 43ft lbs? I've got those tight but I didn't put my torque wrench on them. My bar is still silent when I bounce the rear, no squeaking at all but on some bumps that jar the rear of the car I'm getting clunky sound. I still have the one washer under the rear hole.
I'll check the torque on the them and adjust if needed. If they're at spec I'm going to hit the clamp and cradle that metal to metal contact point with some WD40 and see if that quiets that noise.
|
Correct 43 lbft
I have a gap in my torque wrenches between 21-50 lbft, so they got torqued to 50