|
WOW
My rear sway bar has been squeaking since installation. It’s the BMR adjustable bar with OEM links.
I’d grease the bushings and it would clear up for a bit, only to return. I tried different types of grease with minimal to no improvement.
The washer trick is brilliant! I’m feeling inadequate that I didn’t think of this fix myself.
With one thin-ish washer on the lower hole on each side, the noise and resistance to movement was greatly reduced. I then added another washer under the top mount bolts concerned that it would make the bar loose in the bushings. That was the fix. Smooth, quiet and still tight in the bushings.
Thx for sharing OP!
|