Quote:
Originally Posted by cjperformance
I'd pull the ECU connector and make sure your FF terminal is still seated, and/or make sure there aren't any breaks in the wire... mine came with a dinky little wire with minimal insulation. Been on my list to do something better with it. Also check the other connectors too on the FF connector and coil too.
Pin may have backed out if not seated correctly....
Here's another thread:
https://www.camaro6.com/forums/showthread.php?t=589879 |
I can't imagine it coming out and with the ignition coil codes I just don't think that's what is happening. If the coils are not firing on that side the FF sensor is not going to work. That one has been plugged in to the ECU for over 1.5 years, it was fine when Mike pinned the Reflex about a year ago and it hasn't been apart since then. It's got to be in the coils, ground, fuse or dirty pins under the fuse box. I'll find out tomorrow and give and update.