View Single Post
Old 05-25-2022, 08:33 AM   #9
Crushin_LT1

 
Crushin_LT1's Avatar
 
Drives: 2021 LT1 6spd
Join Date: Nov 2020
Location: Arlington, VA
Posts: 784
Quote:
Originally Posted by 714camaro View Post
Jus finished installing a mms catch can on my 16 camaro ss with an lt4 blower. After initial start up the rpms would surge followed by a rough chop that would cause everything to shake. The rpms surge every 2-3 second until the motor stalled. I rechecked all my fittings and connections to make sure there was no vacuum leak or pinched hose. I'm bamboozled after a full day of trying to figure this out.
The mighty mouse can is set up coming from the port under the supercharger snout near the valley. Mighty mouse includes a piece called a diverter which replaces the factory plug and allows the pressure/oil to be vented to the can. From the can my return line tees off into the brake booster near the throttle body.



Might be a dumb question, but is there a difference between catch cans meant for the LT4 and the LT1? If so, did you purchase the correct one?
__________________
Current: 2021 LT1 Camaro, 6spd, Crush, Corsa NPP, GMPP CAI, Soler Performance Throttle controller
Previous: 1997 V6 Camaro, 5spd, Black

Last edited by Crushin_LT1; 05-25-2022 at 08:36 AM. Reason: Added quote.
Crushin_LT1 is offline   Reply With Quote