Quote:
Originally Posted by Fraxum
Has anyone with an LT1 model tried to fit the Velossa Tech Scoop?
I have one coming and will try first the radiator cover method rather than taking the bumper cover off. Although then I could look for a way to mount a tow hook. No Ram Air but hopefully lower IATs. They did give me a $30 discount to try an LT1 fitment, but it will not affect my review.  I have no way to measure that, but wait maybe I do. I have a newer HPTuners brick. I guess I can record runs even though I do not have the tune open. But then I can't use my shift light.
I am also adding an LT2 IM to continue my M6 11 second quest with the seats in and no tune. |
Hi Frazum, i just had my bumper off to remove the snow deflector on the driver side, same piece gorge removed. I also removed the bolt on crash bar and absorber material behind the front cover , took off about 13 lbs off the nose. Bumper comes off easy. I also moded my stock air box in a way that it now pulls air under the factory air inlet duct , and it leaves the factory inlet untouched. It will pull air from under the headlight and way down low in front of the wheel house. Nice cool fresh air down there. What MPH are you trapping and what gear and RPM .