Quote:
Originally Posted by Trochoidal
Long story on the pod so this is the results of my research. I bought a couple of these pods from various sources. After not getting the results I needed, I created a solid model using Fusion 360. Saved the model as a STL file, and sliced it in Cura. First print was done with PLA and it deformed because of the heat. Second print was done with ABS and it works fine now.
I also printed one like SMG sells using a STL I found on Thingiverse and that wasn’t close to working because it was a sloppy fit.
Here’s some threads on the pod. First link is a pod I purchased the was for an AEM and not iDash. Second link is for the pod I made. I’m also including the dimensions for the one I printed.
https://www.camaro6.com/forums/showthread.php?t=572944
https://www.camaro6.com/forums/showt...php?p=10824702
Do you have a 3D printer? |
I do not thankfully, as I spend enough on stupid tech shit as is with my drones, computers, etc. I am a Cloud DevOps Engineer though and have wanted to venture into it but I have zero creativity to design a solution to a problem.