Quick jack bl 7000 slx
1 Attachment(s)
Got my quick jack bl 7000 slx. Jacked up my 2017 camaro SS, worked perfect. I have 3 bolt on aluminum pinch weld blocks on each side. From front to back I used the second one and the third one to lift it. I used the tall rubber blocks and placed the horizontal blocks. It's perfectly solid when in the air. I also zip tied 4 roller ball bearings to the frames to easily roll it under the car for easy storage.
|
Nice, I have the BL-5000SLX and do the same, the car is solid as a rock. In before the folks saying you need the EXT or you'll die. I purchased the extensions and have never needed or used them.
|
I have the 5000slx i bought for my mustang but never used. Thought they would be to short. You guys use the middle and back pinch weld locations? Wouldnt the front and middle make more sense?
Sent from my iPhone using Tapatalk |
I’m in the market for new DIY stuff. Looking for a jack and jack stands but I’m also interested in them. Although, they are expensive lol.
|
1 Attachment(s)
Quote:
|
It's 250 off at quick jack till the end of August. Promo code SUMMER
|
Quote:
|
Looks like the BL-6000XLT model would work nicely with the far forward and far back lift points? I did a quick measurement and found (for my 2021 ZL1 with the zl1addons pinch weld mounts installed):
Tire spread: 90" Lift Spread Min: 65" Lift Sprad Max: 70" Clearance: 6" |
Quote:
|
Quote:
|
Quote:
|
Quote:
|
Quote:
When I measured out my car as per the Quick Jack website it looked like the wheel to wheel spread (2" off the ground) was 90" and from the front of the front zl1addon lift point clamp thing to the back of the back one was 70" and the back of the front zl1addon lift point clamp to the front of the back one was 65" (for the center section of the part of the zl1addon lift point raised section). Did anyone else measure the car? https://www.quickjack.com/support/measuring-guide/ And for comparison: https://www.quickjack.com/compare/ BL-7000EXT 7,000 CAPACITY (LBS) 3.5" LOWERED HEIGHT 21.25" MAXIMUM HEIGHT 66" MAX. LIFT POINT SPREAD 76.5" FRAME LENGTH BL-7000EXT QuickJack Model BL-6000XLT Car Lift BL-6000XLT 6,000 CAPACITY (LBS) 3.5" LOWERED HEIGHT 21.25" MAXIMUM HEIGHT 76" MAX. LIFT POINT SPREAD 86.5" FRAME LENGTH BL-6000XLT |
It depends what you want it for. I chose the 7000 slx so I can lift all my 5 vehicles with one lift. ( includes truck). The ext was to long for 2 of them.
|
All times are GMT -5. The time now is 09:27 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.